Abstract:Profiled double-skin composite walls (PDSCWs) have been widely used in multi-storey building structures since the 1990s. Using re-entrant profiled plates as faceplates in the PDSCWs eliminates the need for additional connecting members, thus leading to economic designs and convenience in their fabrication. In this paper, analytical and numerical investigations are conducted to study the structural behaviour of PDSCWs with re-entrant profiled faceplates under eccentric compression. Advanced finite element (FE) models incorporating both material and geometric nonlinearities are established and validated against an independent series of test results. A parametric study is conducted to investigate effects of various parameters including material properties of steel and infilled concrete, thickness of the steel faceplates, and depth and width of the composite wall. It is concluded that increasing concrete strength and wall depth can significantly enhance both the axial and bending resistances of the PDSCWs. However, increasing the yield stress and thickness of the steel faceplates can only enhance the bending resistance of the PDSCWs. Therefore, compared to the PDSCWs with high strength steel, using high strength concrete is more effective to enhance the structural behaviour of PDSCWs. Moreover, a sectional analysis method is proposed to determine N-M interaction curves for PDSCWs under combined compression and bending. It is demonstrated that the N-M interaction curves determined by the proposed analytical method agree well with the FE results. Hence, the proposed sectional analysis method and the resulting N-M interaction curves are sufficiently reliable, and they can be used for designing PDSCWs with re-entrant profiled faceplates.

Design of steel-concrete composite panels under low-velocity impact: Local punching failure

Punching shear failure of concrete-filled steel tubular CHS connections

Impact response of SCS sandwich slabs with ultra-high performance concrete: failure mechanism and influence of shear connector configuration

Damage behavior and failure mechanism of composite sandwich panel subjected to localized impact: A comprehensive study

Failure mechanism and failure patterns of SCS composite beams with steel-fiber-reinforced UHPC

Numerical Analysis and Punching Shear Fracture Based Design of Longitudinal Plate to Concrete-Filled CHS Connections

Sectional Strength and Design of Double-Skin Composite Walls Withre-Entrant Profiled Faceplates

Performance of Double-Skin Composite Walls with Re-Entrant Profiled Faceplates under Eccentric Compression

On damage behavior and stability of composite T-shaped stiffened panels under compression after impact considering impact locations

Plasticity-based evaluation method for in-plane shear strength of steel-plate composite element

Numerical Analysis of Low-Velocity Impact Behaviour of Protective Concrete-Filled Steel Plates Composite Wall

TDOF model for evaluating the global and local impact response of steel-plate composite panels

Effective Concrete Failure Area for SC Structures Using Stud and Tie Bar Under Performance Tests

Low-velocity impact response of thermoplastic composite sandwich panels with the intersected corrugated core

Sensitivity Analysis of Steel-Plate Concrete Containment against a Large Commercial Aircraft

Pullout Behavior and Design of Joints Between Slabs and Double-Steel-plate Concrete Composite Walls

Dynamic response and failure of CFRP Kagome lattice core sandwich panels subjected to low-velocity impact

Performance of Concrete-Encased CFST Subjected to Low-Velocity Impact: Shear Resistance Analysis

Analytical Model Formulation of Steel Plate Reinforced Concrete Walls against Hard Projectile Impact

Experimental and numerical study on the dynamic response of steel-reinforced concrete composite members under lateral impact

Investigation on damage behavior of composite T-shaped stiffened panels under compression after multi-point impact considering impact positions