Abstract:This study was conducted to evaluate the applicability of concrete-filled steel tube (CFT) columns made from high-performance construction materials. KBC2016, South Korea’s current building code, limits the maximum compressive strength of concrete at 70 MPa and the maximum yield strength of steel at 650 MPa. Similar restrictions to material properties are imposed on major composite structural design parameters in other countries worldwide. With the recent acceleration of the pace of development in the field of material technology, the compressive strength of commercial concrete has been greatly improved and the problem of low tensile strength, known to be the major limitation of concrete, is being successfully addressed by adding fiber reinforcement to concrete. Therefore, the focus of this study was to experimentally determine the strength and ductility enhancement effects, which depend on material composition. To this end, we performed concentric axial loading tests on CFT stub columns made from steel with a yield strength of 800 MPa and steel fiber-reinforced high-strength concrete. By measuring the strain at the yield point of CFT steel during the test, we could determine whether steel yields earlier than ultimate failure load of the member, which is a key design concept of composite structures. The analysis results revealed that the yield point of steel preceded that of concrete on the stress-strain curve by the concurrent action of the strain increase at the maximum strength, attributable to the high compressive strength and steel fiber reinforcement, and the strain increase induced by the confining stress of the steel tube. Additionally, we performed parametric study using ABAQUS to establish the broad applications of CFT using high-performance materials, with the width-to-thickness ratio as the main parameter. Parametric study was undertaken as experimental investigation was not feasible, and we reviewed the criteria for limiting the width-to-thickness ratio as specified in the current building code.

Effective Concrete Failure Area for SC Structures Using Stud and Tie Bar Under Performance Tests

Experimental Study On Seismic Behavior Of Innovative Multi-Cellular Cft-Walls With Tie-Bolts

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

Experimental Investigation of Concrete-Filled Steel Tubular Longitudinal Gusset Plate Connections

02.05: Design of concrete-filled steel tubular longitudinal gusset plate connections

Sectional Strength Design of Concrete-Infilled Double Steel Corrugated-Plate Walls with T-section

Tensile Behaviour of Transverse Reinforcement with Different Connection Methods in Single Steel-Plate Concrete Composite Structures

Mechanism of Load Introduction and Transfer Within Steel-Encased CFST Members with Shear Connections

Experimental Investigation and Design of Concrete-Filled Steel Tubular CHS Connections

Global Stability Tests and Design of Multi-Celled Concrete-Filled Steel Tubular Walls

Mechanical Behaviour and Design of Concrete-Filled K and KK CHS Connections

Shear Performance of Single Steel-Plate Concrete Composite Beams with Various Transverse Reinforcement Configurations

Bending Capacity of Steel-Concrete-Steel Composite Structures Considering Local Buckling and Casting Imperfection

Pullout behavior of lap splice connections between double-steel-plate composite walls and RC raft foundation in nuclear engineering

An Experimental Study on the Verification of Structural and Seismic Performance of Steel Composite Walls

Design of steel-concrete composite panels under low-velocity impact: Local punching failure

Design Method for Local Buckling Resistance of Double Steel Plate–Concrete Composite Walls with Stiffening Ribs and Tie Plates

Experimental and Numerical Study on the Compression Behavior of Square Concrete-Filled Steel Tube Stub Columns with Steel Fiber-Reinforced High-Strength Concrete

Shear strength of reinforced concrete beams with T-headed bars for safety-related nuclear structures

Pullout Behavior and Design of Joints Between Slabs and Double-Steel-plate Concrete Composite Walls

Failure mechanism and failure patterns of SCS composite beams with steel-fiber-reinforced UHPC