Abstract:Concrete filled double-steel-plate composite walls with shear studs, one type of steel–concrete–steel walls, are recently developed and have been used in high-rise buildings, for which fire safety is a big concern. In order to investigate the fire endurance of this new type of concrete filled double-steel-plate composite walls, three specimens with different axial compression ratios and different lengths and intervals of shear studs were tested under one-side ISO-834 standard fire to obtain the temperature distribution, deformation, and detailed failure modes. Each specimen consisted of a concrete filled double-steel-plate composite wall-body and two boundary columns. Moreover, finite-element-based numerical investigations were conducted to confirm and extend experimental findings. All the concrete filled double-steel-plate composite walls failed in compression–flexure mode with the local buckling at the compressive steel plate. The results indicate that the fire endurance of concrete filled double-steel-plate composite walls is significantly affected by the axial compression ratio, the eccentricity of the axial load, and the bond strength between shear studs and concrete. Axial compression ratio, defined as the ratio of axial compression to the nominal compressive capacity of concrete filled double-steel-plate composite walls, has both positive and negative effects on the fire endurance of concrete filled double-steel-plate composite walls. The axial load eccentricity toward the unexposed side is much more detrimental to the fire endurance of concrete filled double-steel-plate composite walls than the one toward the exposed side. In engineering practice, it is recommended that proper intervals (not greater than 300 mm) and lengths (not less than 40 mm) of the shear studs should be used to ensure the bond between concrete and steel plates.

Pullout Behavior and Design of Joints Between Slabs and Double-Steel-plate Concrete Composite Walls

Mechanical Properties of Novel Out-of-plane Steel Beam–concrete Wall Pinned Joints with T-shaped Steel Connectors under Monotonic Tension Load

Pullout behavior of lap splice connections between double-steel-plate composite walls and RC raft foundation in nuclear engineering

Compressive Behavior of Slender Profiled Double-Skin Composite Walls

Performance of Double-Skin Composite Walls with Re-Entrant Profiled Faceplates under Eccentric Compression

Seismic behavior of double steel plate–HSC composite walls

Sectional Strength and Design of Double-Skin Composite Walls Withre-Entrant Profiled Faceplates

Experimental Study of Steel Plate Composite Shear Wall Units under Cyclic Load

Seismic behavior of steel tube-double steel plate-concrete composite walls: Experimental tests

Experimental study on seismic behavior of high-strength concrete filled double-steel-plate composite walls

Experimental Study on Tensile Fracture Mechanism of Butt Joints in Multi-Celled CFST Walls

Sectional Strength Design of Concrete-Infilled Double Steel Corrugated-Plate Walls with T-section

Determining Experimental Ductile Behavior of Composite Walls Considering Second-Order Effects: A Case Study for Multi-Celled CFST Walls

Cyclic Behavior of Steel Tube-Double Steel Plate-Concrete Composite Walls

02.05: Design of concrete-filled steel tubular longitudinal gusset plate connections

Experimental Study on Seismic Behavior of a Novel RC Slab- SC Wall Joint Based on UHPC and Rebar - Steel Plate Lap Splices

EXPERIMENTAL STUDY ON PULLOUT BEHAVIOR OF LAP SPLICE CONNECTIONS BETWEEN DOUBLE-STEEL-PLATE COMPOSITE WALLS AND RC RAFT FOUNDATION IN NUCLEAR ENGINEERING

Experimental study on seismic behaviors of the welded L-shaped double steel plate-concrete composite shear wall

Study on axial compression performance of double steel plate-concrete composite walls with stiffening ribs and tie plates

Design Method for Local Buckling Resistance of Double Steel Plate–Concrete Composite Walls with Stiffening Ribs and Tie Plates

Structure Behavior of Concrete Filled Double-Steel-plate Composite Walls under Fire