Abstract:Seawater electrolysis faces unique and fundamental chemical challenges, such as the suppression of highly detrimental halogen chemistries [1], that poison the current state-of-the-art anode catalyst and accelerate the degradation of the membrane [2]. The technically favored solution path is to address these issues by developing a new selective catalyst and possibly by limiting operating conditions [3]. Therefore, developing a facile and cost-effective way to design highly active, selective, and and stable seawater-splitting catalysts is of great importance for research and industry [4]. In this work, hexagonal NiFe-layered double hydroxide (LDH) nanosheets were synthesized by one-step solvothermal reactions. As synthesized NiFe-LDH catalyst exhibits high activity, selectivity, and stability towards the oxygen evolution reaction (OER) in alkaline electrolyte, delivering current densities of 10 mA/cm 2 at low overpotentials of 359 mV, with no significant degradation observed during RDE testing at constant voltage of 1.57 V for 72 hours in 1.0 M KOH electrolyte. In addition, in order to fabricate catalyst coated electrode (CCE), the nanostructured NiFe-LDH catalyst was homogeneously sprayed onto a platinized titanium porous transport layer (PTL) using an ultrasonic spray coating system. As prepared CCE is used as an anode and commercially available Raney nickel catalyst deposited on a nickel fiber frit is used as a cathode to assemble a MEA with Sustainion ® X37-50 grade T anion exchange membrane (AEM) that was tested in alkaline seawater. Employing local seawater, the AEM electrolyzer cell demonstrated stable performance for over 1000 hours at a constant current density of 300 mA cm -2 . Reference: [1] S.-C. Ke, R. Chen, G.-H. Chen, X.-L. Ma, Energy Fuels 2021, 35, 12948. [2] S. Dresp, F. Luo, R. Schmack, S. Kühl, M. Gliech, P. Strasser, Energy Environ. Sci. 2016, 9, 2020. [3] S. Dresp, F. Dionigi, S. Loos, J. Ferreira de Araujo, C. Spöri, M. Gliech, H. Dau, P. Strasser, Advanced Energy Materials 2018, 8, 1800338. [4] H. Koshikawa, H. Murase, T. Hayashi, K. Nakajima, H. Mashiko, S. Shiraishi, Y. Tsuji, ACS Catal. 2020, 10, 1886.

Long-Term Stability of Seawater Acidification and Its Effect on the Formation of Mg(OH)2 Films with a Hierarchical Porous Structure in Bipolar Membrane-Based Direct Seawater Electrolysis

Superlattice Formation of Crystal Water in Layered Double Hydroxides for Long‐Term and Fast Operation of Aqueous Rechargeable Batteries

Exploring the Interface of Porous Cathode/Bipolar Membrane for Mitigation of Inorganic Precipitates in Direct Seawater Electrolysis

Membrane distillation operated at high seawater concentration factors: Role of the membrane on CaCO3 scaling in presence of humic acid

Direct Seawater Electrolysis via Synergistic Acidification by Inorganic Precipitation and Proton Flux from Bipolar Membrane

Direct seawater electrolysis by adjusting the local reaction environment of a catalyst

Stable Seawater Electrolysis Over 10 000 H via Chemical Fixation of Sulfate on NiFeBa‐LDH

Self-protecting CoFeAl-layered double hydroxides enable stable and efficient brine oxidation at 2 A cm −2

Acidification-based direct electrolysis of treated wastewater for hydrogen production and water reuse

Solidophobic Surface for Electrochemical Extraction of High-Valued Mg(OH)2 Coupled with H2 Production from Seawater

Ion sieving membrane for direct seawater anti-precipitation hydrogen evolution reaction electrode

Layered Double Hydroxides with Carbonate Intercalation as Ultra‐Stable Anodes for Seawater Splitting at Ampere‐Level Current Density

Electroreduction of Alkaline/natural Seawater: Self-cleaning Pt/carbon Cathode and On-Site Co-Synthesis of H2 and Mg Hydroxide Nanoflakes

Stepwise strategies for overcoming limitations of membraneless electrolysis for direct seawater electrolysis

Direct Electrolytic Splitting of Seawater: Activity, Selectivity, Degradation, and Recovery Studied from the Molecular Catalyst Structure to the Electrolyzer Cell Level

Surface-derived Phosphate Layer on NiFe-layered Double Hydroxide Realizes Stable Seawater Oxidation at the Current Density of 1 A°cm−2

One-Step Synthesis of Selective Nife-Layered Double Hydroxide Anode Catalyst for Highly Efficient and Stable Anion Exchange Membrane Water Electrolyzers, Operating with Seawater

Citrate ions-modified NiFe layered double hydroxide for durable alkaline seawater oxidation

Efficient bubble/precipitate traffic enables stable seawater reduction electrocatalysis at industrial-level current densities

Stability of Bipolar Plate Materials for Proton‐Exchange Membrane Water Electrolyzers: Dissolution of Titanium and Stainless Steel in DI Water and Highly Diluted Acid

Tungstate Intercalated NiFe Layered Double Hydroxide Enables Long-Term Alkaline Seawater Oxidation