Abstract:The production of large amounts of green hydrogen (H 2 ) by electrochemical water splitting represents one of the key pillars to reach net-zero by 2050. As one of the major drawbacks, both low-temperature proton-exchange membrane (PEM) as well as anion-exchange membrane (AEM) electrolysis still rely on the utilization of noble metals in the catalyst layers driving the evolution of H 2 and oxygen (O 2 ) on the cathode (HER) and on the anode (OER), respectively. Beyond that, the requirement for highly pure water feeds to prevent degradation of the cell performance over time was previously addressed as one of the main concerns. In particular, this holds true for arid regions located close to the ocean. Advantageously, these coastal arid zones provide essentially unlimited access to seawater, coupled with ample solar irradiation and wind throughout the entire year.[1] One of the major challenges for direct seawater electrolysis lies in the development of selective catalysts, especially for the anode due to the inherently faster reaction kinetics of the competing two-electron chlorine evolution reaction (ClER). Nickel-iron layered double hydroxides (NiFe-LDH) were identified as active and selective OER electrocatalysts in a previous study[2] by our group. Dionigi et al.[3] recently reported a general design principle for selective seawater electrolysis, in which alkaline pH values > 7.5 are claimed to favor OER over ClER for overpotentials < 480 mV. At the cathode, state-of-the-art electrolyzers utilize Pt-based catalysts for an efficient HER.[2] For direct seawater electrolysis, however, not only the high cost but also the weak stability due to chloride-induced corrosion restrict the applicability of Pt-based electrodes. In our contribution, we thus present noble-metal free catalyst materials based on metal chalcogenides with high HER activity and improved stability in alkaline seawater electrolyte in a single-cell electrolyzer setup. Membrane-electrode assemblies (MEAs) with superior corrosion-resistance by a modification of the porous transport layers (PTLs) for both cathode and anode will be presented, which outperform reference MEAs containing Pt-based cathodes in alkaline seawater electrolysis. The optimized noble-metal-free electrode design (fig. 1) combined with well-controlled electrolyte feeding enables alkaline seawater electrolysis operating at industrially relevant current densities. References [1] S. Dresp, F. Dionigi, M. Klingenhof, P. Strasser, ACS Energy Lett. 2019 , 4 , 933. [2] S. Dresp, T. N. Thanh, M. Klingenhof, S. Brückner, P. Hauke, P. Strasser, Energy Environ. Sci. 2020 , 13 , 1725. [3] F. Dionigi, T. Reier, Z. Pawolek, M. Gliech, P. Strasser, ChemSusChem 2016 , 9 , 962. Figure 1

Stepwise strategies for overcoming limitations of membraneless electrolysis for direct seawater electrolysis

Design of Noble-Metal-Free Membrane Electrode Assemblies Based on Metal Chalcogenides for Electrochemical Hydrogen Production Via Alkaline Seawater Electrolysis

Direct seawater electrolysis by adjusting the local reaction environment of a catalyst

Investigating Water and Ion Transport in a Novel Cell Design for Seawater Electrolysis

Design, Operation and Simulation of a Passive Osmosis-Integrated Electrolyzer for Seawater Electrolysis

A membrane-based seawater electrolyser for hydrogen generation

Catalysts for Direct Seawater Electrolysis: Current Status and Future Prospectives

One-Step Synthesis of Selective Nife-Layered Double Hydroxide Anode Catalyst for Highly Efficient and Stable Anion Exchange Membrane Water Electrolyzers, Operating with Seawater

Direct Electrolytic Splitting of Seawater: Activity, Selectivity, Degradation, and Recovery Studied from the Molecular Catalyst Structure to the Electrolyzer Cell Level

Design Rules for Porous Flow-through Electrodes Used in Membrane-Free Electrolyzers for Treatment of Desalination Reject Brine

Direct Seawater Electrolysis via Synergistic Acidification by Inorganic Precipitation and Proton Flux from Bipolar Membrane

A sodium-ion-conducted asymmetric electrolyzer to lower the operation voltage for direct seawater electrolysis

Exploring the Interface of Porous Cathode/Bipolar Membrane for Mitigation of Inorganic Precipitates in Direct Seawater Electrolysis

Membrane Electrolyzers for Hydrogen Production: From Catalyst Fundamentals to Devices

Monopolar membrane-assisted acid-alkaline amphoteric water electrolysis towards efficient hydrogen generation

Advanced membrane-based electrode engineering toward efficient and durable water electrolysis and cost-effective seawater electrolysis in membrane electrolyzers

Hydrogen Production with Seawater-Resilient Bipolar-Membrane Electrolyzers

Strategies for overcoming seawater adverse effects on cathodic hydrogen evolution reaction electrocatalysts

Hydrogen production with seawater-resilient bipolar membrane electrolyzers

Pathways Toward Efficient and Durable Anion Exchange Membrane Water Electrolyzers Enabled By Electro‐Active Porous Transport Layers

A Review of Hydrogen Production via Seawater Electrolysis: Current Status and Challenges