Abstract:All-perovskite tandem solar cells promise high photovoltaic performance at low cost. So far however, their efficiencies cannot compete with traditional inorganic multi-junction solar cells and they generally underperform in comparison to what is expected from the isolated single junction devices. Understanding performance losses in all-perovskite tandem solar cells is a crucial aspect that will accelerate advancement. Here, we perform extensive selective characterization of the individual sub-cells to disentangle the different losses and limiting factors in these tandem devices. We find that non-radiative losses in the high-gap subcell dominate the overall recombination losses in our baseline system as well as in the majority of literature reports. We consecutively improve the high-gap perovskite subcell through a multi-faceted approach, allowing us to enhance the open-circuit voltage ($V_{OC}$) of the subcell by up to 120 mV. Due to the (quasi) lossless indium oxide interconnect which we employ for the first time in all-perovskite tandems, the $V_{OC}$ improvements achieved in the high-gap perovskites translate directly to improved all-perovskite tandem solar cells with a champion $V_{OC}$ of 2.00 V and a stabilized efficiency of 23.7%. The efficiency potential of our optimized all-perovskite tandems reaches 25.2% and 27.0% when determined from electro- and photo-luminescence respectively, indicating significant transport losses as well as imperfect energy-alignment between the perovskite and the transport layers in the experimental devices. Further improvements to 28.4% are possible considering the bulk quality of both absorbers measured using photo-luminescence on isolated perovskite layers. Our insights therefore not only show an optimization example but a generalizable evidence-based strategy for optimization utilizing optical sub-cell characterization.

Reducing Voltage Loss via Dipole Tuning for Electron‐Transport in Efficient and Stable Perovskite‐Silicon Tandem Solar Cells (Adv. Energy Mater. 40/2024)

Organic Solar Cells: A New Interconnecting Layer of Metal Oxide/Dipole Layer/Metal Oxide for Efficient Tandem Organic Solar Cells (adv. Energy Mater. 17/2015)

Tackling Energy Loss for High-Efficiency Organic Solar Cells with Integrated Multiple Strategies.

Reducing Perovskite/C60 Interface Losses via Sequential Interface Engineering for Efficient Perovskite/Silicon Tandem Solar Cell

Reducing sputter induced stress and damage for efficient perovskite/silicon tandem solar cells

Tailoring Perovskite/C60 Interface by Reactive Passivators for Stable Tandem Solar Cells

Enhanced optoelectronic coupling for perovskite-silicon tandem solar cells

Large-Area 23%-Efficient Monolithic Perovskite/Homojunction-Silicon Tandem Solar Cell with Enhanced UV Stability Using Down-Shifting Material

Interface engineering for high-performance, triple-halide perovskite–silicon tandem solar cells

Efficient Monolithic Perovskite-Si Tandem Solar Cell Enabled by an Ultra-Thin Indium Tin Oxide Interlayer

Monolithic All‐Perovskite Tandem Solar Cells with Minimized Optical and Energetic Losses (Adv. Mater. 11/2022)

Regulating Charge Carrier Recombination in the Interconnecting Layer to Boost the Efficiency and Stability of Monolithic Perovskite/Organic Tandem Solar Cells

Minimizing Voltage Losses via Synergistically Reducing Hetero-Interface Energy Offset for High Efficiency Perovskite Solar Cells

Monolithic perovskite/organic tandem solar cells with 23.6% efficiency enabled by reduced voltage losses and optimized interconnecting layer

Monolithic All‐Perovskite Tandem Solar Cells with Minimized Optical and Energetic Losses

Perovskite-silicon tandem solar cells with bilayer interface passivation

Enhanced optical path and electron diffusion length enable high-efficiency perovskite tandems

Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Compatible Textured Silicon

Understanding and Minimizing $V_{OC}$ Losses in All-Perovskite Tandem Photovoltaics

Efficient and Reproducible Monolithic Perovskite/Organic Tandem Solar Cells with Low-Loss Interconnecting Layers

Efficient and stable perovskite-silicon tandem solar cells with copper thiocyanate-embedded perovskite on textured silicon