Abstract:Electronic band structure engineering of metal-halide perovskites (MHP) lies at the core of fundamental materials research and photovoltaic applications. However, reconfiguring the band structures in MHP for optimized electronic properties remains challenging. This article reports a generic strategy for constructing near-edge states to improve carrier properties, leading to enhanced device performances. The near-edge states are designed around the valence band edge using theoretical prediction and constructed through tailored material engineering. These states are experimentally revealed with activation energies of around 23 milli-electron volts by temperature-dependent time-resolved spectroscopy. Such small activation energies enable prolonged carrier lifetime with efficient carrier transition dynamics and low non-radiative recombination losses, as corroborated by the millisecond lifetimes of microwave conductivity. By constructing near-edge states in positive-intrinsic-negative inverted cells, a champion efficiency of 25.4% (25.0% certified) for a 0.07-cm2 cell and 23.6% (22.7% certified) for a 1-cm2 cell is achieved. The most stable encapsulated cell retains 90% of its initial efficiency after 1100 h of maximum power point tracking under one sun illumination (100 mW cm-2) at 65 degrees C in ambient air. Efficient doping of hybrid perovskites holds the potential to further advance solar cell efficiency. This study presents a generic strategy for perovskite doping by constructing ultra-shallow near-edge states. These states can effectively prolong electron-hole recombination through efficient trap and de-trap processes, resulting in over 25% efficiency in inverted perovskite solar cells with superior long-term operational stability.image

Reducing sputter induced stress and damage for efficient perovskite/silicon tandem solar cells

Reducing damage of sputtering and improving conductivity of transparent electrodes for efficient semi-transparent perovskite solar cells

Reducing Voltage Loss via Dipole Tuning for Electron‐Transport in Efficient and Stable Perovskite‐Silicon Tandem Solar Cells (Adv. Energy Mater. 40/2024)

Constructing Ultra-Shallow Near-Edge States for Efficient and Stable Perovskite Solar Cells

Reducing Perovskite/C60 Interface Losses via Sequential Interface Engineering for Efficient Perovskite/Silicon Tandem Solar Cell

Transparent Electrode for Monolithic Perovskite/silicon-Heterojunction Two-Terminal Tandem Solar Cells

Surface chemical polishing and passivation minimize non-radiative recombination for all-perovskite tandem solar cells

Minimizing Voltage Losses via Synergistically Reducing Hetero-Interface Energy Offset for High Efficiency Perovskite Solar Cells

Constructing tin oxides Interfacial Layer with Gradient Compositions for Efficient Perovskite/Silicon Tandem Solar Cells with Efficiency Exceeding 28%

Surface Reconstruction for Efficient and Stable Monolithic Perovskite/Silicon Tandem Solar Cells with Greatly Suppressed Residual Strain

Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability

Reducing the Interfacial Energy Loss Via Oxide/perovskite Heterojunction Engineering for High Efficient and Stable Perovskite Solar Cells

Monolithic perovskite/organic tandem solar cells with 23.6% efficiency enabled by reduced voltage losses and optimized interconnecting layer

Efficient and Reproducible Monolithic Perovskite/Organic Tandem Solar Cells with Low-Loss Interconnecting Layers

Tailoring Perovskite/C60 Interface by Reactive Passivators for Stable Tandem Solar Cells

Advancements of highly efficient perovskite based tandem solar cells

All-perovskite Tandem Solar Cells with 24.2% Certified Efficiency and Area over 1 Cm2using Surface-Anchoring Zwitterionic Antioxidant

Regulating Interfacial Defect and Stress in Tin‐Lead Perovskite Solar Cells

Regulating Charge Carrier Recombination in the Interconnecting Layer to Boost the Efficiency and Stability of Monolithic Perovskite/Organic Tandem Solar Cells

Interface engineering of highly efficient perovskite solar cells

Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Compatible Textured Silicon