Abstract:This paper reports a grain regrowth and bifacial passivation strategy to reduce recombination losses for wide‐bandgap perovskite solar cells. As a result, PCEs of 21.9% and 19.9% are achieved for the opaque and semitransparent perovskite solar cells, respectively. Furthermore, a perovskite/silicon 4‐terminal (4‐T) tandem cell with an attractive PCE of 29.8% is realized. The wide‐bandgap perovskite solar cell is a crucial part of perovskite/silicon tandem solar cells, which offer an avenue for surpassing the power conversion efficiency (PCE) limit of single‐junction silicon solar cells. However, the actual efficiency of such tandem solar cells today is diminished by the nonradiative recombination losses in the wide‐bandgap perovskite subcells. Here, this work reports a grain regrowth and bifacial passivation (GRBP) strategy to reduce recombination losses at the grain boundaries and perovskite/charge transport layer interfaces simultaneously. This is achieved by a posttreatment of perovskite films with a mixture of methylammonium thiocyanate (MASCN) and phenethylammonium iodide (PEAI). The MASCN induces the regrowth of perovskite grains and simultaneously facilitates the penetration of PEAI into the hole‐transport‐layer (HTL)/perovskite bottom interface. Thereby, the bulk and interface nonradiative recombination losses are reduced and the open‐circuit voltage in solar cells is considerably increased. PCEs of 21.9% and 19.9% for the 1.65‐eV bandgap opaque and semitransparent perovskite solar cells, respectively, are obtained. The encapsulated semitransparent perovskite solar cells retain their initial efficiency following 500 h of operation under one‐sun illumination in ambient conditions. The perovskite/silicon 4‐terminal (4‐T) tandem cells are fabricated with impressive PCEs 29.8% and 28.5% for 0.049 cm2 and 1 cm2 devices, respectively.

Reducing Perovskite/C60 Interface Losses via Sequential Interface Engineering for Efficient Perovskite/Silicon Tandem Solar Cell

Tailoring Perovskite/C60 Interface by Reactive Passivators for Stable Tandem Solar Cells

Wide-Gap Perovskite Via Synergetic Surface Passivation and Its Application Toward Efficient Stacked Tandem Photovoltaics.

Minimizing Voltage Losses via Synergistically Reducing Hetero-Interface Energy Offset for High Efficiency Perovskite Solar Cells

Interfacial Engineering of Wide‐Bandgap Perovskites for Efficient Perovskite/CZTSSe Tandem Solar Cells

Reducing nonradiative recombination for highly efficient inverted perovskite solar cells via a synergistic bimolecular interface

Perovskite-silicon tandem solar cells with bilayer interface passivation

Grain Regrowth and Bifacial Passivation for High‐Efficiency Wide‐Bandgap Perovskite Solar Cells

Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Compatible Textured Silicon

Reducing the Interfacial Energy Loss Via Oxide/perovskite Heterojunction Engineering for High Efficient and Stable Perovskite Solar Cells

Reduced bilateral recombination by functional molecular interface engineering for efficient inverted perovskite solar cells

A binary 2D perovskite passivation for efficient and stable perovskite/silicon tandem solar cells

Interface engineering for high-performance, triple-halide perovskite–silicon tandem solar cells

Molecular Synergistic Effect for High Efficiency Monolithic Perovskite/Perovskite/Silicon Triple‐Junction Tandem Solar Cells

Suppressing Phase Segregation in Wide Bandgap Perovskites for Monolithic Perovskite/Organic Tandem Solar Cells with Reduced Voltage Loss

Enhanced optoelectronic coupling for perovskite-silicon tandem solar cells

Zwitterion Reduces Open‐Circuit Voltage Loss in Wide‐Bandgap Perovskite Solar Cells with 22% Efficiency and Its Application in Tandem Devices

Regulating Charge Carrier Recombination in the Interconnecting Layer to Boost the Efficiency and Stability of Monolithic Perovskite/Organic Tandem Solar Cells

Interface optimization and growth control for high efficiency wide bandgap perovskite solar cells

Multifunctional Buffer Layer Engineering for Efficient and Stable Wide‐Bandgap Perovskite and Perovskite/Silicon Tandem Solar Cells

Buried-Interface Engineering of Conformal 2D/3D Perovskite Heterojunction for Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Textured Silicon