Abstract:Multijunction solar cells offer high potential to improve the efficiency beyond the single-junction limit. The record power conversion efficiency of monolithic all-perovskite tandem solar cells (26.4%) has now surpassed that of the single-junction counterparts (25.7%). The two-terminal tandem architectures, in most cases, require a “matched” current between the top and bottom subcells for an optimal tandem performance. In some cases, where the two subcells have distinct fill factors, a “power matching” strategy shows better performance than “current matching”. In this study, we prove that optimal performance of monolithic all-perovskite tandem solar cells is obtained when the top subcell has a higher short-circuit current than the bottom one. This is attributed to both optical and electrical properties of the all-perovskite tandem cells. We also investigate the optimal tandem configurations under real-world conditions, where solar spectra, angle of incidence, and cell temperature are different from the standard test conditions. We find that the top subcell shifts to thinner optimal thickness under blue-rich solar spectra. We also observe that the bottom subcell shifts to thicker optimal thickness due to larger angle of incidence under real-world conditions. Since two perovskite subcells have similar temperature coefficients, the real-world cell temperatures have little impact the optimal tandem configurations, but will affect the annual energy yield. We further obtain the real-world optimized tandem configurations, which can increase the annual energy yield compared with the one optimized under standard test conditions. The current-mismatching losses under real-world conditions can be reduced by optimized configurations, and even be turned into energy gains in certain cases. This finding enhances the confidence in promoting high-efficient, customizable tandem solar cells for different regions and installation methods.

Monolithic All‐Perovskite Tandem Solar Cells with Minimized Optical and Energetic Losses (Adv. Mater. 11/2022)

Monolithic All‐Perovskite Tandem Solar Cells with Minimized Optical and Energetic Losses

Toward high-efficiency solution-processed tandem solar cells

Perovskite/Colloidal Quantum Dot Tandem Solar Cells: Theoretical Modeling and Monolithic Structure

Understanding and Minimizing $V_{OC}$ Losses in All-Perovskite Tandem Photovoltaics

Prospects for Metal Halide Perovskite-Based Tandem Solar Cells

Performance Optimization of Monolithic All-Perovskite Tandem Solar Cells under Standard and Real-World Solar Spectra

Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction

Optical Simulation-Aided Design and Engineering of Monolithic Perovskite/Silicon Tandem Solar Cells

Recent Advances of Monolithic All‐Perovskite Tandem Solar Cells: From Materials to Devices

Efficient monolithic all-perovskite tandem solar modules with small cell-to-module derate

Interface engineering for high-performance, triple-halide perovskite–silicon tandem solar cells

Reducing Voltage Loss via Dipole Tuning for Electron‐Transport in Efficient and Stable Perovskite‐Silicon Tandem Solar Cells (Adv. Energy Mater. 40/2024)

Nano-optical designs for high-efficiency monolithic perovskite–silicon tandem solar cells

Current or Power Matching? A Third Option for Monolithic All-Perovskite Tandem Solar Cells

Recent Progress in Developing Efficient Monolithic All-Perovskite Tandem Solar Cells

Optical Design of Monolithic Two-Terminal Perovskite/Si Tandem Solar Cells for Efficient Photon Management

All-perovskite Tandem Solar Cells with 24.2% Certified Efficiency and Area over 1 Cm2using Surface-Anchoring Zwitterionic Antioxidant

Efficient Light Management in a Monolithic Tandem Perovskite/Silicon Solar Cell by Using a Hybrid Metasurface

Perovskite-perovskite tandem photovoltaics with optimized band gaps

All-perovskite tandem solar cells with 24.2% certified efficiency and area over 1 cm2 using surface-anchoring zwitterionic antioxidant