Abstract:BaTiO3 has advantages of high permittivity, low dielectric loss, low cost and environment friendly. However, due to the nonlinear dielectric behavior occurred around the phase transition temperature of BaTiO3 ceramic, its availability in the field of temperature-stable capacitor is limited. To modify the dielectric-temperature properties of BaTiO3, a series of BaTi1-xCexO3 (x=0-0.20) ceramics was synthesized by solid-state reaction method. Ce dopant was introduced into the B-site (Ti-site) of BaTiO3. The effects of Ce dopant on the phase evolution, defect state, microstructure and dielectric properties were investigated. The modifying mechanism was also discussed with the help of first-principles calculation method. In all ceramic samples, it is revealed that Ce element completely enters the B-site of BaTiO3 in the form of Ce4+ ion. With the increase of Ce doping concentration, the room temperature structure of BaTi1-xCexO3 ceramics transforms from tetragonal/pseudo-cubic structure into orthorhombic/tetragonal structure, then into pseudo-cubic structure. Owing to the radius difference between Ce4+ and Ti4+ ions, Ce doping will lead to the rising of lattice parameters, accompanied by the appearance of local distortion and the decrease of long-range ferroelectric order, the variation of band structure, density of states and charge density configuration, as well as the generation of Ba and Ti vacancies. Compared with pure BaTiO3 ceramic, the average grain size of Ce-doped ceramics decreases first and then increases with the increase of Ce content, while the relative density of ceramics increases gradually. The peak dielectric constant of BaTi1-xCexO3 ceramic increases first and then decreases as the Ce concentration increasing. The corresponding temperature is slowly reduced from 122 celcius to 112 celcius in the x value range of 0-0.08, then rapidly declines to -3 celcius in the x value range of 0.08-0.20. BaTi1-xCexO3 ceramics with x >= 0.06 have the dielectric behavior of diffused phase transition (DPT). And the x=0.20 ceramic exhibits the typical characteristic of relaxor ferroelectric, with the room temperature dielectric constant of 3258.38, and the |Delta epsilon(r)/epsilon(r25 celcius)|<= 22% temperature range of -60-87 celcius, which matches the requirement of EIA X5S standard. Therefore, it can be concluded that B-site Ce doping will effectively enhance the permittivity stability of BaTiO3 in a variable temperature environment. This will provide some new ideas to develop dielectric materials with stable dielectric properties in wide temperature range.

Structural, dielectric, and piezoelectric properties of Ce-doped Bi7Ti4.2Ta0.3W0.5O21 intergrowth ferroelectric ceramics

Enhanced piezoelectric properties of Ce-doped Bi3Ti1.5W0.5O9 high-temperature Aurivillius piezoceramics

High Piezoelectricity and Thermal Stability of Ce-doped CaBi2Nb2O9-based High-Temperature Ceramics

Ultrahigh Temperature Bi3ti0.96sc0.02ta0.02nbo9-Based Piezoelectric Ceramics

Broadening the Dielectric Stability Temperature Range of BNBST Relaxor Ferroelectric Ceramics by Rare Earth Ce Doping for Energy Storage

High Performance Aurivillius-Type Bismuth Titanate Niobate (bi3tinbo9) Piezoelectric Ceramics for High Temperature Applications

Experimental study and first-principles calculation of structural characteristics and dielectric properties of Ba Ti<sub>1-x </sub>Ce<sub>x </sub>O<sub>3</sub> ceramics

The impact of co-doping Ce, W, and Mn on the microstructure and piezoelectric performance of high-temperature piezoelectric ceramics based on CaBi2Nb2O9

Lead-Free BiFeO3-BaTiO3 Ceramics with High Curie Temperature: Fine Compositional Tuning Across the Phase Boundary for High Piezoelectric Charge and Strain Coefficients.

Simultaneously Achieved High Piezoelectricity and High Resistivity in Na0.5Bi4.5Ti4O15-Based Ceramics with High Curie Temperature

Effect of Tantalum Ion Doping on the Structure and Electrical Properties of Bi3Ti1.5W0.5O9-Bi4Ti3O12 Intergrowth Bismuth-Layered Ceramics

Excellent Thermal Stability and Enhanced Piezoelectric Performance of Bi(Ni2/3Nb1/3)O3-modified BiFeO3-BaTiO3 Ceramics

Effect of W/Cr co-doping on electrical properties of Ca0.94Ce0.06Bi4Ti4O15 high-temperature piezoceramics

Effect of (K0.5Ce0.5) complex on the electrical properties of lead‐free Bi4Ti2.86W0.14O12 high‐temperature piezoelectric ceramics

Achieving high Curie temperature and prominent piezoelectric response via site engineering for BiFeO3-BaTiO3 ceramics

Abnormal Curie Temperature Behavior and Enhanced Strain Property by Controlling Substitution Site of Ce Ions in Batio3 Ceramics

Phase transition and electrical properties of Ba 0.7 Ca 0.3 TiO 3- BiFeO 3 ceramics

Effects of Oxide Additives on the Phase Structures and Electrical Properties of SrBi4Ti4O15 High-Temperature Piezoelectric Ceramics

Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics

Impact of crystal structure and defect on the electric properties in (LiCeY)-doped CaBi2Nb2O9-based high-temperature piezoceramics

Na1/2Bi1/2TiO3‐based ceramics with increased depolarization temperature and piezoelectric coefficient