Abstract:The binary perovskite-type compound (1 − x )BiFeO 3 – x BaTiO 3 (BF-BT) is considered as a promising high-temperature lead-free piezoelectric material due to its high Curie temperature ( T C > 400 °C) and better electromechanical properties. In this work, ternary lead-free piezoelectric ceramics with a chemical formula of (0.67 − x )BiFeO3–0.33BaTiO3– x Bi(Zn0.5Ti0.5)O 3 + 1 mol% MnO 2 (where x = 0–0.05) were prepared by the conventional solid-state reaction route. The effects of Bi(Zn 0.5 Ti 0.5 )O 3 introduction on the phase structures and microstructures, piezoelectric and dielectric properties, as well as impedance characteristics of BF-BT ceramics were investigated in detail. Firstly, all the samples synthesized exhibit a pure perovskite structure with the coexistence of rhombohedral ( R ) and tetragonal ( T ) phases, and the T phase content increases with increase in x . A small amount of Bi(Zn 0.5 Ti 0.5 )O 3 ( x ≤ 0.03) that were incorporated into the perovskite lattice of BF-BT can promote the grain growth of ceramics. Secondly, all samples were found with a notable relaxed phase transition behavior, T C of the system decreases with increase in x . The AC impedance spectra of the samples were fitted and analyzed according to the R-CPE equivalent circuit model, the electric impedance of the ceramics at high temperatures was mainly contributed by grain boundaries. Moreover, the dielectric relaxation activation energy of the samples firstly decreases and then increases with increase in x . Finally, the composition with x = 0.02 shows the optimized electrical properties among these samples, including T C = 454 °C, d 33 = 117 pC/N, k p = 23%, tan δ = 0.11, which are mainly benefited from the bismuth content compensation and the substitution of (Zn 0.5 Ti 0.5 ) 3+ for Fe 3+ at B-site reducing the valence change of Fe 3+ in BF-BT.

Na1/2Bi1/2TiO3‐based ceramics with increased depolarization temperature and piezoelectric coefficient

(Bi0.5Na0.5)TiO3 ferroelectric ceramics: Achieving high depolarization temperature and improved piezoelectric properties

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Structural Evolution, Electrical Properties and Electric-Field-induced Changes of (0.8− X )pbtio 3 – X BiFeO 3 –0.2bazro 3 System Near the Morphotropic Phase Boundary

Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics

Comprehensive Optimization of Piezoelectric Coefficient and Depolarization Temperature in Mn-doped Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3-BaTiO3 Lead-Free Piezoceramics

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Effects of Bi(Zn0.5Ti0.5)O3 introduction on the structures and electrical properties of BiFeO3–BaTiO3 lead-free piezoelectric ceramics

Ultrahigh thermal stability of lead-free Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3-BaTiO3 ternary piezoceramics upon quenching treatment

Pb(In1/2Nb1/2)O3-PbZrO3-PbTiO3 ternary ceramics with temperature-insensitive and superior piezoelectric property

A Research on Delayed Thermal Depolarization, Electric Properties, and Stress in (Bi0.5Na0.5)TiO3-Based Ceramic Composites

High Depolarization Temperature and Superior Piezoelectric Performance with Complex Structural Evolution in BiFeO3PbTiO3–(Sr0.7Bi0.2□0.1)TiO3 Systems

Origin of enhanced depolarization temperature in quenched Na0.5Bi0.5TiO3-BaTiO3 ceramics

Phase/domain Structure and Enhanced Thermal Stable Ferro-/Pyroelectric Properties of (1-X)0.94na0.48 Bi0.44TiO3-0.06BaTiO3:xZnO Ceramics

Simultaneous enhancement of piezoelectric constant and thermal stability in lead-free Fe-doped 0.94(Na1/2Bi1/2)TiO3-0.06BaTiO3 ceramics

Enhanced piezoelectric properties of Na1/2Bi1/2TiO3-BiAlO3 ceramics by quenching treatment

Modified Pb(Mg 1/3 Nb 2/3 )O 3 ‐PbZrO 3 –PbTiO 3 ceramics with high piezoelectricity and temperature stability

Electrical properties of 0.94Bi 0.5 Na 0.5 TiO 3 –0.06Ba(Zr 0.055 Ti 0.945 )O 3 lead-free ceramics with high thermal stability

Electrical properties of 0.94Bi0.5Na0.5TiO3–0.06Ba(Zr0.055Ti0.945)O3 lead-free ceramics with high thermal stability

Electrical properties of 0.94Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>–0.06Ba(Zr<Subscript>0.055</Subscript>Ti<Subscript>0.945</Subscript>)O<Subscript>3</Subscript> lead-free ceramics with high thermal stability

Enhanced Temperature Stability in Tb-doped (ba0.99ca0.01)(ti0.98zr0.02)o3 Lead Free Ceramics