Abstract:The binary perovskite-type compound (1 − x )BiFeO 3 – x BaTiO 3 (BF-BT) is considered as a promising high-temperature lead-free piezoelectric material due to its high Curie temperature ( T C > 400 °C) and better electromechanical properties. In this work, ternary lead-free piezoelectric ceramics with a chemical formula of (0.67 − x )BiFeO3–0.33BaTiO3– x Bi(Zn0.5Ti0.5)O 3 + 1 mol% MnO 2 (where x = 0–0.05) were prepared by the conventional solid-state reaction route. The effects of Bi(Zn 0.5 Ti 0.5 )O 3 introduction on the phase structures and microstructures, piezoelectric and dielectric properties, as well as impedance characteristics of BF-BT ceramics were investigated in detail. Firstly, all the samples synthesized exhibit a pure perovskite structure with the coexistence of rhombohedral ( R ) and tetragonal ( T ) phases, and the T phase content increases with increase in x . A small amount of Bi(Zn 0.5 Ti 0.5 )O 3 ( x ≤ 0.03) that were incorporated into the perovskite lattice of BF-BT can promote the grain growth of ceramics. Secondly, all samples were found with a notable relaxed phase transition behavior, T C of the system decreases with increase in x . The AC impedance spectra of the samples were fitted and analyzed according to the R-CPE equivalent circuit model, the electric impedance of the ceramics at high temperatures was mainly contributed by grain boundaries. Moreover, the dielectric relaxation activation energy of the samples firstly decreases and then increases with increase in x . Finally, the composition with x = 0.02 shows the optimized electrical properties among these samples, including T C = 454 °C, d 33 = 117 pC/N, k p = 23%, tan δ = 0.11, which are mainly benefited from the bismuth content compensation and the substitution of (Zn 0.5 Ti 0.5 ) 3+ for Fe 3+ at B-site reducing the valence change of Fe 3+ in BF-BT.

Simultaneous enhancement of piezoelectric constant and thermal stability in lead-free Fe-doped 0.94(Na1/2Bi1/2)TiO3-0.06BaTiO3 ceramics

Comprehensive Optimization of Piezoelectric Coefficient and Depolarization Temperature in Mn-doped Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3-BaTiO3 Lead-Free Piezoceramics

(Bi0.5Na0.5)TiO3 ferroelectric ceramics: Achieving high depolarization temperature and improved piezoelectric properties

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Na1/2Bi1/2TiO3‐based ceramics with increased depolarization temperature and piezoelectric coefficient

Enhanced Temperature Stability and Defect Mechanism of BNT‐Based Lead‐Free Piezoceramics Investigated by a Quenching Process

Origin of enhanced depolarization temperature in quenched Na0.5Bi0.5TiO3-BaTiO3 ceramics

Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics

Highly Enhanced Thermal Stability in Quenched Na0.5Bi0.5TiO3-based Lead-Free Piezoceramics

Ultrahigh thermal stability of lead-free Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3-BaTiO3 ternary piezoceramics upon quenching treatment

Enhanced piezoelectric performance in Na0.5Bi4.5Ti4O15‐based Bismuth‐layered ceramics by Nb/Mn doping modification

Enhanced piezoelectric properties of Na1/2Bi1/2TiO3-BiAlO3 ceramics by quenching treatment

Enhanced Piezoelectricity and Thermal Stability of Electrostrain Performance in BiFeO3-Based Lead-Free Ceramics

Achieving high Curie temperature and prominent piezoelectric response via site engineering for BiFeO3-BaTiO3 ceramics

Enhancing piezoelectric coefficient and thermal stability in lead-free piezoceramics: insights at the atomic-scale

Improved chemical defects, domain structure and electrical properties of BiFeO 3 –BaTiO 3 lead-free ceramics by simultaneous Na/Bi codoping and quenching process

Effects of Bi(Zn0.5Ti0.5)O3 introduction on the structures and electrical properties of BiFeO3–BaTiO3 lead-free piezoelectric ceramics

Simultaneously enhancing piezoelectric performance and thermal depolarization in lead-free (Bi,Na)TiO3-BaTiO3 via introducing oxygen-defect perovskites

Investigation of nonstoichiometric Fe on the ferroelectric properties of BiFeO3-based piezoelectric ceramics

Enhanced Temperature Stability of (1 − )(KNa)LiNbO-(BiNa)TiO Lead-Free Piezoelectric Ceramics

Electrical properties of 0.94Bi0.5Na0.5TiO3–0.06Ba(Zr0.055Ti0.945)O3 lead-free ceramics with high thermal stability