Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Highly Enhanced Thermal Stability in Quenched Na0.5Bi0.5TiO3-based Lead-Free Piezoceramics

Ultrahigh thermal stability of lead-free Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3-BaTiO3 ternary piezoceramics upon quenching treatment

Improved chemical defects, domain structure and electrical properties of BiFeO 3 –BaTiO 3 lead-free ceramics by simultaneous Na/Bi codoping and quenching process

Enhanced Temperature Stability and Defect Mechanism of BNT‐Based Lead‐Free Piezoceramics Investigated by a Quenching Process

Origin of enhanced depolarization temperature in quenched Na0.5Bi0.5TiO3-BaTiO3 ceramics

Enhanced piezoelectric properties of Na1/2Bi1/2TiO3-BiAlO3 ceramics by quenching treatment

Optimization of Ferroelectric Ordering and Thermal Stability in Na1/2Bi1/2TiO3-Based Lead-Free Single Crystal Through Defect Engineering

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Optimization of Ferroelectric Ordering and Thermal Stability in Na 1/2 Bi 1/2 TiO 3 -Based Lead-Free Single Crystal through Defect Engineering

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Enhanced piezoelectric performance in Na0.5Bi4.5Ti4O15‐based Bismuth‐layered ceramics by Nb/Mn doping modification

Thermal stability and enhanced electrical properties of Er<sup>3+</sup>-modified Na<sub>0.5</sub>Bi<sub>4.5</sub>Ti<sub>4</sub>O<sub>15</sub> lead-free piezoelectric ceramics

Study on Dielectric and Piezoelectric Properties of Na_(0.5)Bi_(0.5)TiO_3-K_(0.5)Bi_(0.5)TiO_3-BaTiO_3 Lead-free Piezoceramics System

Electrical properties of 0.94Bi0.5Na0.5TiO3–0.06Ba(Zr0.055Ti0.945)O3 lead-free ceramics with high thermal stability

Electrical properties of 0.94Bi 0.5 Na 0.5 TiO 3 –0.06Ba(Zr 0.055 Ti 0.945 )O 3 lead-free ceramics with high thermal stability

Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics

Simultaneous Enhancement of Piezoelectricity and Temperature Stability in (K,na)nbo3-Based Lead-Free Piezoceramics by Incorporating Perovskite Zirconates

Thermal stability and enhanced electrical properties of Er3+-modified Na0.5Bi4.5Ti4O15 lead-free piezoelectric ceramics

Bi(Zn0.5Ti0.5)O3 Induced Domain Evolution and Its Effect on Electrical Property and Thermal Stability of 0.8Bi0.5na0.5tio3-0.2Bi0.5k0.5tio3 Ceramics

Quenching and Electrical Current Poling Effect on Improved Ferroelectric and Piezoelectric Properties in BiFeO 3 -Based High-Temperature Piezoceramics