Abstract:A series of ultra-clean, unsupported Cu-doped and Pd-doped Ni model catalysts was investigated to develop the fundamental concept of metal doping impact on the carbon tolerance and catalytic activity in the dry reforming of methane (DRM). Wet etching with concentrated HNO3 and a subsequent single sputter–anneal cycle resulted in the full removal of an already existing oxidic passivation layer and segregated and/or ambient-deposited surface and bulk impurities to yield ultra-clean Ni substrates. Carbon solubility, support effects, segregation processes, cyclic operation temperatures, and electronic and ensemble effects were all found to play a crucial role in the catalytic activity and stability of these systems, as verified by X-ray photoelectron spectroscopy (XPS) surface and bulk characterization. Minor Cu promotion showed the almost complete suppression of coking with a moderate reduction in catalytic activity, while high Cu loadings facilitated carbon growth alongside severe catalytic deactivation. The improved carbon resistance stems from an increased CH4 dissociation barrier, decreased carbon solubility in the bulk, good prevailing CO2 activation properties and enhanced CO desorption. Cyclic DRM operation on surfaces with Cu content that is too high leads to impaired carbon oxidation kinetics by CO2 and causes irreversible carbon deposition. Thus, an optimal and stable NiCu composition was found in the region of 70–90 atomic % Ni, which allows an appropriate high syngas production rate to be retained alongside a total coking suppression during DRM. In contrast, the more Cu-rich NiCu systems showed a limited stability under reaction conditions, leading to undesired surface and bulk segregation processes of Cu. The much higher carbon deposition rate and solubility of unsupported NiPd and Pd model catalysts results in severe carbon deposition and catalytic deactivation. To achieve enhanced carbon conversion and de-coking, an active metal oxide boundary is required, allowing for the increased clean-off of re-segregated carbon via the inverse Boudouard reaction. The carbon bulk diffusion on the investigated systems depends strongly on the composition and decreases in the following order: Pd > NiPd > Ni > NiCu > Cu.

Mechanistic of Coke-Resistance Ni/ZrO2 Catalyst for Dry Reforming of Methane Under External Electric Fields: A Combined First-Principles and Microkinetic Modeling Study

Nickel‐Catalyzed Dry Reforming of Methane Via Modulating the Zirconia Shapes

Dry Reforming of Methane on Ni/LaZrO 2 Catalyst under External Electric Fields: A Combined First-Principles and Microkinetic Modeling Study

Promoted coke resistance of Ni by surface carbon for the dry reforming of methane

Synergy of Oxygen Vacancies and Ni 0 Species to Promote the Stability of a Ni/ZrO 2 Catalyst for Dry Reforming of Methane at Low Temperatures

Mechanistic and microkinetic insights into the stability and activity of Ni 3 In catalyst for dry methane reforming

Modulating Proportion of Ni0 Species Stabilized by Ni2+ on Ni-MgO Catalyst with Superior Stability for Dry Reforming of Methane

Recent Advances in Coke Management for Dry Reforming of Methane over Ni-Based Catalysts

Investigation into the coking-related key reaction steps in dry reforming of methane over NiMgO x catalyst

Nickel Catalyst with Atomically-Thin Meshed Cobalt Coating for Improved Durability in Dry Reforming of Methane

Recent advances in promoting dry reforming of methane of Nickel-based catalysts

Preparing a Zr-Doped CeO 2 Nanorod to Improve the Catalytic Performance of the Ni-Based Catalyst for Dry Reforming of Methane by Enhancing Oxygen Supply

The effect of interfacial engineering on the deactivation resistance of nickel-based catalysts for dry reforming of methane

Kinetic Study of Zirconia-Alumina-Supported Ni-Fe Catalyst for Dry Reforming of Methane: Impact of Partial Pressure and Reaction Temperature

Dry Reforming of Methane on NiCu and NiPd Model Systems: Optimization of Carbon Chemistry

Improving the anti-coking ability in the Ni-M(M = Ce, Zr, Co)@SiO 2 yolk-shell catalysts for dry reforming of methane

Promoting Methane Dry Reforming over Ni Catalysts Via Modulating Surface Electronic Structures of BN Supports by Doping Carbon

Highly Efficient and Stable Methane Dry Reforming Enabled by a Single-Site Cationic Ni Catalyst

Enhanced Dry Reforming of Methane Catalysis by Ni at Heterointerfaces between Thin MgAlOx and Bulk ZrO2

Dry reforming of methane with a Ni-based catalyst: a kinetic and thermodynamic analysis

Microwave-assisted catalytic dry reforming of methane with CO 2 over nitrogen-doped catalysts derived from metal-organic frameworks