Abstract:Surging demand for high-energy-density cathodes based on Li(Ni x Co y Mn 1− x − y )O 2 (NCM) and Li(Ni x Co y Al 1− x − y )O 2 (NCA) for LIBs for EVs has tripled the price of Co in three years. As the price of Co rises rapidly, efforts to remove Co from the cathodes are increasing, but Co, even in minute amounts, plays an essential role in maintaining rate capability and structural stability while reducing cation mixing. 1 So the realization of high-performance, Co-free layered cathodes poses a serious technical challenge. Recently, LiNi 0.9 Mn 0.1 O 2 (NM90) was proposed as an alternative Ni-rich, Co-free cathode material. 2 Although the long-term cycling stability of the NM90 is acceptable, its capacity is substantially less than that of a LiNi 0.9 Co 0.05 Mn 0.05 O 2 (NCM90) when the NM90 is charged to a standard operating voltage (4.3 V) because the charging ends in the midst of the second hexagonal phase (H2) to the third hexagonal phase (H3) transition. In this study, we investigate to stabilizing the delithiated structure of an NM90 cathode at 4.4 V is proposed, namely, the introduction of a tertiary element into the cathode in combination with the modification of the electrolyte. The introduction of 1mol% Mo into NM90 accompanies increasing in the upper cut-off voltage to 4.4 V (versus Li + /Li) can help realize a half cell, delivering a capacity of 234 mAh g -1 that is comparable to that of NCM with similar Ni contents. The cycling stability of a full cell featuring the Li(Ni 0.89 Mn 0.1 Mo 0.01 )O 2 (Mo–NM90) cathode is enhanced with a modified electrolyte (EF91, EMC:FEC = 9:1); retaining 86% of its initial capacity after 1,000 cycles while providing 880 Wh kg cathode −1 . Mo–NM90 cathode is able to deliver a high capacity with cycling stability suitable for the long service life for electric vehicles at a reduced material cost, furthering the realization of a commercially viable Co-free cathode for LIBs. Reference s : [1] C. Delmas, I. Saadoune, A. Rougier, J. Power Sources, 44 (1993) 595-602. [2] A. Aishova, G.-T. Park, C. S. Yoon, Y.-K. Sun, Adv. Energy Mater. 10 (2019) 1903179.

Dilute Electrolyte to Mitigate Capacity Decay and Voltage Fading of Co-Free Li-Rich Cathode for Next-Generation Li-Ion Batteries

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Introducing high-valence elements into cobalt-free layered cathodes for practical lithium-ion batteries

High-Efficiency Electrolyte for Li-Rich Cathode Materials Achieving Enhanced Cycle Stability and Suppressed Voltage Fading Capable of Practical Applications on a Li-Ion Battery

Nanostructured Co‐Free Layered Oxide Cathode that Affords Fast‐Charging Lithium‐Ion Batteries for Electric Vehicles

Transition Metal-Doped Co-Free Layered Cathode for High-Performance Li-Ion Batteries

Stabilized High-Voltage Operation of Co-Free NMX Cathode via CEI-Controlling

Understanding Co roles towards developing Li-rich layered oxide cathodes for lithium-ion batteries

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

Multifunctional Self-Reconstructive Cathode/Electrolyte Interphase Layer for Cobalt-Free Li-rich Layered Oxide Cathode

Engineering of cobalt-free Ni-rich cathode material by dual-element modification to enable 4.5 V-class high-energy-density lithium-ion batteries

A 5V-class Cobalt-free Battery Cathode with High Loading Enabled by Dry Coating

Stabilizing Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode by generating ion-conductive polymer coating layer with 1, 3-dioxolane introducing electrolyte for lithium-ion batteries

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

A New Co-Free Ni-Rich LiNi 0.8 Fe 0.1 Mn 0.1 O 2 Cathode for Low-Cost Li-Ion Batteries

Trace Doping of Multiple Elements Enables Stable Cycling of High Areal Capacity LiNi0.5Mn1.5O4 Cathode

Enhanced Electrochemical Performance of the Lithium-Manganese-Rich Cathode for Li-Ion Batteries with Na and F CoDoping

A New Ternary Co-Free Layered Cathode, Li[Ni1--Ti Al ]O2, for High-Energy Lithium-Ion Batteries

High Entropy and Co-Free High Nickel Based Layered LiNi0.9Mn0.1O2 Cathode for Li-Ion Batteries

Li-Rich Li[Li1/6 Fe1/6 Ni1/6 Mn1/2 ]O2 (LFNMO) Cathodes: Atomic Scale Insight on the Mechanisms of Cycling Decay and of the Improvement due to Cobalt Phosphate Surface Modification

A High Energy‐Density, Cobalt‐Free, Low‐Nickel LiNi0.7Mn0.25Al0.05O2 Cathode with a High‐Voltage Electrolyte for Lithium‐Metal Batteries