Abstract:Surging demand for high-energy-density cathodes based on Li(Ni x Co y Mn 1− x − y )O 2 (NCM) and Li(Ni x Co y Al 1− x − y )O 2 (NCA) for LIBs for EVs has tripled the price of Co in three years. As the price of Co rises rapidly, efforts to remove Co from the cathodes are increasing, but Co, even in minute amounts, plays an essential role in maintaining rate capability and structural stability while reducing cation mixing. 1 So the realization of high-performance, Co-free layered cathodes poses a serious technical challenge. Recently, LiNi 0.9 Mn 0.1 O 2 (NM90) was proposed as an alternative Ni-rich, Co-free cathode material. 2 Although the long-term cycling stability of the NM90 is acceptable, its capacity is substantially less than that of a LiNi 0.9 Co 0.05 Mn 0.05 O 2 (NCM90) when the NM90 is charged to a standard operating voltage (4.3 V) because the charging ends in the midst of the second hexagonal phase (H2) to the third hexagonal phase (H3) transition. In this study, we investigate to stabilizing the delithiated structure of an NM90 cathode at 4.4 V is proposed, namely, the introduction of a tertiary element into the cathode in combination with the modification of the electrolyte. The introduction of 1mol% Mo into NM90 accompanies increasing in the upper cut-off voltage to 4.4 V (versus Li + /Li) can help realize a half cell, delivering a capacity of 234 mAh g -1 that is comparable to that of NCM with similar Ni contents. The cycling stability of a full cell featuring the Li(Ni 0.89 Mn 0.1 Mo 0.01 )O 2 (Mo–NM90) cathode is enhanced with a modified electrolyte (EF91, EMC:FEC = 9:1); retaining 86% of its initial capacity after 1,000 cycles while providing 880 Wh kg cathode −1 . Mo–NM90 cathode is able to deliver a high capacity with cycling stability suitable for the long service life for electric vehicles at a reduced material cost, furthering the realization of a commercially viable Co-free cathode for LIBs. Reference s : [1] C. Delmas, I. Saadoune, A. Rougier, J. Power Sources, 44 (1993) 595-602. [2] A. Aishova, G.-T. Park, C. S. Yoon, Y.-K. Sun, Adv. Energy Mater. 10 (2019) 1903179.

High Entropy and Co-Free High Nickel Based Layered LiNi0.9Mn0.1O2 Cathode for Li-Ion Batteries

Synthesis and characterization of core–shell high-nickel cobalt-free layered LiNi0.95Mg0.02Al0.03O2@Li2ZrO3 cathode for high-performance lithium ion batteries

High-entropy doping promising ultrahigh-Ni Co-free single-crystalline cathode toward commercializable high-energy lithium-ion batteries

Enhancing surface‐to‐bulk stability of layered Co‐free Ni‐rich cathodes for long‐life Li‐ion batteries

A universal multifunctional dual cation doping strategy towards stabilized ultra-high nickel cobalt-free lithium layered oxide cathode

Al- and Nb-Comodified Ni-Rich NCM Cathode for High-Performance Lithium-Ion Batteries

Al2O3-Coated, Single Crystal Zr/Y co-Doped High-Ni NCM Cathode Materials for High-Performance Lithium-Ion Batteries

Bulk-to-surface engineering allows for extremely stable co-free Ni-rich cathodes for rechargeable batteries

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

High-entropy doping for high-performance zero-cobalt high-nickel layered cathode materials

Improved Electrochemical Performance of Co-Free Ni-Rich Cathode Material for Lithium-Ion Battery Through Multi-Element Composite Modification

Understanding Improved Stability of Co-free Ni-rich Single Crystal Cathode Materials by Combined Bulk and Surface Modifications

Both Interface and Bulk Stable LiNi 0.5 Mn 1.5 O 4 Cathodes for High-Energy Li-Ion Batteries

Nanostructured Co‐Free Layered Oxide Cathode that Affords Fast‐Charging Lithium‐Ion Batteries for Electric Vehicles

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

Low‐Electronegativity Cationic High‐Entropy Doping to Trigger Stable Anion Redox Activity for High‐Ni Co‐Free Layered Cathodes in Li‐Ion Batteries

Realization of a High-Voltage and High-Rate Nickel-Rich NCM Cathode Material for LIBs by Co and Ti Dual Modification

Improving the Electrochemical Performance of Ultrahigh-Nickel-based Layered LiNi0.95Mn0.05O2 Cathode Through Cobalt Modification for Next-Generation High-Energy Li-ion Batteries

Stabilizing Surface Chemistry and Texture of Single-Crystal Ni-rich Cathodes for Li-ion Batteries

Transition Metal-Doped Co-Free Layered Cathode for High-Performance Li-Ion Batteries

Na Doping and CeO2 Nanoparticle Surface Modification Enhancing the Li-Rich Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material for a Lithium-Ion Battery