Abstract:This paper is a continuation study of the residual compressive strength of composite laminates after impact under hygrothermal conditions. Two carbon fibre/epoxy plywood specimens with different lay-ups ([45/-45/0/0/45/0/0/0/90/-45/0]s and [45/-45/0/90/0 /0/0/0/90/0/-45/45]s) were investigated, The materials were subjected to 500 h, 1000 h and 2000 h of service time in a climatic chamber at a temperature of 60 °C and 100% relative humidity, followed by low-velocity post-impact compression using an energy level of 15 J. Experimental and numerical simulations are used to study the residual compressive strength and damage extension of the material. Using the ultrasonic C-scan technique, the internal damage of the specimens was scanned, and the damage evolution in impact and compression tests was analysed. Damage evolution in impact and compression tests was investigated using ultrasonic C-scanning to scan the internal damage of the specimens. The strain change maps of the specimens during compression are studied using the Digital Imaging (DIC) technique. Vumat subroutine coded in Fortran and used in commercial software (ABAQUS) for numerical simulation. To study the effect of damage extension of materials on post-impact and post-impact compression for different hygrothermal times. It was found that the residual compressive strength depended on factors such as the material's hygrothermal time and the initial defects in the plywood; that the 90° and ± 45° fibre orientations played a positive role in the material's hygrothermal; that the hygrothermal made the material's damage more catastrophic; and that the buckling of hygrothermal specimens was not only at the impact position, but was also reflected at the edges. In CAI testing, it was found that the hygrothermally treated specimens were damaged similarly to the desiccation treated specimens, but that compression resulted in a flexural position affected by hygrothermal, which determined the material CAI strength.

Hygrothermal effects on translaminar fracture toughness of quasi-isotropic laminates with different stacking sequences

The influence of temperature and moisture on the mode I fracture toughness and associated fracture morphology of a highly toughened aerospace CFRP

Macro-mechanical Analysis of Tensile Strength of Glass/carbon Fiber Reinforced Plastics Hybrid Composites under Hydrothermal Environment

Analysis of Residual Post-Impact Compressive Strength of Composite Laminates Under Hygrothermal Conditions

Influence of the combined effect of long hygrothermal aging and thermal cycling on mode I and II interlaminar fracture toughness of carbon/epoxy composites

Effect of temperature and cyclic hygrothermal aging on the interlaminar shear strength of carbon fiber/bismaleimide (BMI) composite

Experimental and numerical investigation on compression after impact behavior of hygrothermal aged CFRP laminates

Investigation of the Tensile Performance and Failure Mechanism of Carbon–aramid Hybrid Fibers/epoxy Sandwich Structure Laminates Using the UV-thermal Synergetic Curing Mechanism: Experimentation and Simulation

Internal shear damage evolution of CFRP laminates ranging from -100°C to 100°C using in-situ X-ray computed tomography

Study on interlaminar performance of CNTs/epoxy film enhanced GFRP under low-temperature cycle

Effect of stacking configuration on dynamic tensile properties of braided carbon fibre composites under medium-low strain rates

Mechanical properties and failure mechanisms of composite laminates with classical fabric stacking patterns

High Strain Rate Effect Of Carbon Fiber Laminates Under Hygrothermal Environment

Coupled Effects of High Temperature and Strain Rate on Compressive Properties of Hybrid Fiber UHTCC

Experimental study on mechanical behavior of laminates at low temperature

Damage accumulation during high temperature fatigue of Ti/SiCf metal matrix composites under different stress amplitudes

A multi-linear constitutive relation considering the temperature effect on quasi-static mode I delamination in UD/MD laminates

Mechanical behavior in bending deformation of thermoplastic composite laminates with different stacking sequences

Effects of voids on residual tensile strength after impact of hygrothermal conditioned CFRP laminates

The temperature effect on the inter-laminar shear properties and failure mechanism of 3D orthogonal woven composites

Failure mechanism and heat treatment effect of 3D-printed bio-inspired helicoidal CF/PEEK composites