Abstract:Mechanical property testing, spectral analysis, phase analysis, scattering evaluation and mechanism research of CFRP under various temperature and moisture composite environments. Temperature and moisture are important environmental conditions governing the usage of carbon fiber‐reinforced plastics (CFRP). In this study, tensile, compression, and shear tests of woven CFRP composites were conducted in four composite environments: cold‐temperature dry state, room‐temperature dry state, elevated‐temperature dry state, and elevated‐temperature wet state. Fourier transform infrared (FTIR) spectroscopy was used to analyze the molecular composition and structure under these environments. The fracture morphology was also analyzed using scanning electron microscopy (SEM) to understand the deterioration mechanism of the material properties at the macro and micro scales. Finally, a two‐parameter Weibull statistical model was used to evaluate the scattering of the composites. The results demonstrate that the tensile, compressive, and shear properties of the material decrease under harsh conditions, and the degradation effect on the ultimate strength is much greater than that of the modulus. Cold‐temperature dry and elevated‐temperature wet conditions are particularly severe. Composite environments significantly affect the macroscopic failure process and ultimate failure mode of materials. In general, the temperature and humidity of the matrix system acts at the core of the deterioration mechanism of composites, affecting the properties of the fiber/matrix and orthogonal woven fiber interfaces, and eventually resulting in a loss of their constitutive strength and bearing capacity. The theoretical ultimate strength were consistent with the experimental values. Highlights Comprehensive mechanical property testing in multiple composite environments. Degradation mechanisms were revealed from multiscale morphology analysis. Scattering of composites were evaluated using statistical analyses. Cold temperature dry and elevated temperature wet were the worst states. Deterioration effect of environment on matrix and interface is the core failure mechanism.

The influence of temperature and moisture on the mode I fracture toughness and associated fracture morphology of a highly toughened aerospace CFRP

Influence of the combined effect of long hygrothermal aging and thermal cycling on mode I and II interlaminar fracture toughness of carbon/epoxy composites

Effect of low temperature on interlaminar fracture toughness of multi-directional CFRP and CFRP-steel interfaces

Effect of the cooling rate on the fracture toughness of carbon fiber reinforced thermoplastic composites

Internal shear damage evolution of CFRP laminates ranging from -100°C to 100°C using in-situ X-ray computed tomography

Effect of thermal and hydrothermal aging on the crashworthiness of carbon fiber reinforced plastic composite tubes

Effect of temperature and moisture composite environments on the mechanical properties and mechanisms of woven carbon fiber composites

Improving Interlaminar Fracture Toughness and Impact Performance of Carbon Fiber/Epoxy Laminated Composite by Using Thermoplastic Fibers

Evaluating the loading rate dependency of mode I delamination for composite laminates at different temperatures

Effects of thermoplastic resin content on mode-II interlaminar fracture toughness of carbon fiber reinforced epoxy composite

A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites

Fracture toughness and failure behavior of CF/epoxy composites interleaved with melt‐infused PET, PEI, and PEEK film

Study on Mode I interlaminar fracture behavior of automated fiber placement in situ consolidation thermoplastic composite considering the influence of roller compaction pressure

Mode II Interfacial Fracture Characterization of Foam Core Sandwich Materials at Elevated Temperatures: the Effects of Frictional Stresses Between the Crack Edges

Low velocity impact and pseudo-ductile behaviour of carbon/glass/epoxy and carbon/glass/PMMA hybrid composite laminates for aircraft application at service temperature

Effect of nonwoven interlayer melting temperature and matrix toughness on mode I and mode II fracture toughness of carbon fiber/benzoxazine composites

Mode I Interfacial Fracture Characterization of Foam Core Sandwich Materials at Elevated Temperatures

The effects of temperature and hygrothermal aging on the properties of CF/PA6 composite and its compression failure mechanisms

Interlaminar Fracture Behavior of Carbon Fiber/Polyimide Composites Toughened by Interleaving Thermoplastic Polyimide Fiber Veils

Interlaminar Fracture Toughness Characterization of Laminated Composites: A Review

Effect of fiber orientation of adjacent plies on the mode I delamination fracture of carbon fiber reinforced polymer multidirectional laminates