Abstract:Low frequency vibration–assisted forming (LFVF) with high excitation force and dynamic response is beneficial because of the low load and high forming quality. To reveal the mechanism of LFVF, low frequency vibration–assisted tension (LFVT) with different amplitudes was performed on W-tempered (WT) and peak-aged (T6) 7075 alloy sheets, and the influences of low frequency vibration on the mechanical behaviors and microstructure evolution were investigated. The application of low frequency vibration created a remarkable vibration-softening effect, and a transition from vibration hardening to vibration softening was observed in the LFVT of 7075-T6. Besides, the stress-overshooting phenomenon occurred after vibration excitation in the LFVT of 7075-T6. The vibration-softening effect and stress-overshooting phenomenon were enhanced when the vibration amplitude was increased from 0.078 to 0.243 mm. The ductility of 7075-WT and 7075-T6 sheets could be improved with a vibration amplitude of 0.165 mm. The fracture elongation of 7075-WT and 7075-T6 increased from 17.93% and 13.62% to 20.14% and 14.45%, respectively. An increase in the vibration amplitude resulted in a slight increase in the hardness of the 7075-T6 samples, whereas naturally aged 7075-WT samples exhibited the opposite effect. In addition, the low-angle grain boundaries (LAGBs) and dislocation density generally increased with the superimposition of vibration for 7075-WT and 7075-T6, because the vibration stress provided additional energy for the initiation and migration of dislocations. For the LFVT of 7075-T6, the dislocation tangles enhanced by the interaction between precipitates and dislocations resulted in increased hardness and stress overshooting. The LFVT of 7075-WT with a large vibration amplitude resulted in the peak values for the LAGBs and dislocation density because of dislocation annihilation and absorption to the grain boundaries. These results provide a fundamental understanding of LFVF in high-strength aluminum alloys.

Observation of Portevin-Le Chatelier serrations in 6061-O aluminum alloy under ultra-low-frequency vibration-assisted tension

On the Propagation and Pulsation of Portevin-Le Chatelier Deformation Bands: an Experimental Study with Digital Speckle Pattern Metrology

The Portevin-Le Chatelier Effect in Al-Mg Alloy Investigated by Infrared Pyrometry

Strain Ratio Effects on Low-Cycle Fatigue Behavior and Deformation Microstructure of 2124-T851 Aluminum Alloy

Characterization of Portevin–Le Chatelier Effect in Aluminum Alloy AA5052 under Strain-Controlled Tensile Test Via Digital Image Correlation and Acoustic Emission

Characterization of the deformation behaviors associated with the serrated flow of a 5456 Al-based alloy using two orthogonal digital image correlation systems

Mechanical behaviors and microstructure characteristics of W-tempered and peak-aged 7075 alloy sheets under low frequency vibration–assisted tension

On the spatio-temporal characteristics of the Portevin-Le Chatelier effect in aluminium alloy AA5182: An experimental and numerical study

The Portevin-Le Chatelier (PLC) effect in an Al-Cu aluminum alloy fabricated by selective laser melting

Fracture behavior of a rapidly solidified thin-strip continuous cast AA5182 Al-Mg alloy with the Portevin-Le Chatelier effect under varying strain rates

Experimental investigations on kinetics of Portevin–Le Chatelier effect in Al–4wt.%Cu alloys

Investigation on the Portevin-Le Chatelier Deformation Bands in Al-Cu Alloys

The Influence of Temperature on the PLC Effect in Al-Mg Alloy

Deformation Measurements of Serrated Yielding Shear Bands in Al-4%Cu Alloy

Influence of Nature Aging on Serrated Yielding of 6061 Al-based Alloy

Study of vibration frequency-fatigue strength action of 6061-T6 aluminum alloy during fillet welding

In Situ Analysis of the Portevin-Le Chatelier Effect from Low to High-Entropy Alloy in Equal HfNbTaTiZr System

Spatial characteristics of the Portevin-Le Chatelier deformation bands in Al-4 at%Cu polycrystals

White-Light Digital Speckle Image Correlation Analysis of the Portevin-Le Chatelier Shearing Band in Multiscale

Microstructural Evolution and Mechanical Behavior of Pure Aluminum Ultra-Thin Strip under Roller Vibration

Preliminary Time Series Analysis of Serrated Yielding in Al-4%Cu Alloy