Abstract:The objective of this study aims to investigate the performance of thermoplastic polyurethane elastomers (TPU)-modified asphalt, with special focus on the influence of polyurethane synthesis parameters upon the performance of base asphalt. In this study, the TPU modifier was incorporated into base asphalt to prepare TPU-modified asphalt by using a self-determined laboratory process. The properties of polyester-based TPU and polyether-based TPU modified asphalt with different contents was analyzed by the base performance tests. The Fourier transform infrared spectroscopy (FTIR), fluorescent microscope, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal gravity (TG), dynamic shear rheology (DSR), and bending beam rheology (BBR) tests were conducted to expose chemical, microstructure, and rheological properties of the asphalt binders, respectively. The results indicated that the modified asphalt with 5% TPU modifier exhibited a favorable performance in terms of the penetration, ductility, softening point, and rotational viscosity, respectively. The isocyanate and polyol reacted to form carbamate in the TPU-modified asphalt, and moreover the isocyanate and aromatic compounds reacted to form halohydrins in the asphalt. Large particles contained in the polyester-based TPU-modified asphalt increased obviously with the increase of C h (Hard segment content) and r (Isocyanate root index, molar ratio between NCO and OH) value, the fracture mode of it subjected to external load indicated a typical brittle fracture. The content of MDI in the synthesized polyurethane modifier was an important factor affecting the high-temperature stability of the modified asphalt. The polyester-based TPU modifier had a better high temperature performance than the polyether-based TPU modifier. The polyether polyol chain segment showed a greater flexibility as compared to polyester polyol; the addition of polyether polyols can be effectively offset of MDI chain rigidity as r ≤ 1 and C h < 40% leading to the improvement of the viscoelastic property of asphalt. When C h = 40% and r = 0.95, the polyether-based TPU-modified asphalt exhibited the same high-temperature grade as the polyester-based TPU-modified asphalt, whereas the polyether-based TPU-modified asphalt showed obviously higher low temperature grades. The polyester-based TPU with C h = 40% and r = 1 can be used as a modifier to increase the durability of asphalt binders.

Characterising the modifying efficiency of polyphosphoric acid to bitumens with different oil sources

Design and Modification Mechanism of a Novel High-Viscosity Thermoplastic Polyurethane Modified Asphalt

Thermal Behaviour And Improved Properties Of Sbr And Sbr/Natural Bitumen Modified Bitumens

Evaluation of the improved properties of SBR/weathered coal modified bitumen containing carbon black

Investigation on Thermo-Rheological Properties and Stability of Sbr Modified Asphalts Containing Palygorskite Clay

Rheological and Bonding Properties of Aged Bio-Bitumen Derived from Slow Pyrolysis of Bamboo Waste

Properties of polymer modified asphalt by polyphosphoric acid through molecular dynamics simulation and experimental analysis

Modifying Effect and Mechanism of Polymer Powder on the Properties of Asphalt Binder for Engineering Application

The Synergistic Effect of Polyphosphates Acid and Different Compounds of Waste Cooking Oil on Conventional and Rheological Properties of Modified Bitumen

Study on the Performance and Modification Mechanism of Polyphosphoric Acid (PPA)/Styrene–Butadiene–Styrene (SBS) Composite Modified Asphalt

Research of Low-Temperature Performance of Polyphosphoric Acid-Modified Asphalt

Research Progress and Prospect of Polyphosphoric Acid Modified Asphalt Technology

High-Temperature Characteristics of Polyphosphoric Acid-Modified Asphalt and High-Temperature Performance Prediction Analysis of Its Mixtures

Relation Between Adhesion Properties and Microscopic Characterization of Polyphosphoric Acid Composite SBS Modified Asphalt Binder

Evaluating the Effects of Polyphosphoric Acid (PPA) on the Anti-Ultraviolet Aging Properties of SBR-Modified Asphalt

Research on Performance of SBS-PPA and SBR-PPA Compound Modified Asphalts

Mechanical and Rheological Properties of Polyurethane-Polyurea (Pu-Pua) Modified Asphalt Binder

Effects of Polyurethane Thermoplastic Elastomer on Properties of Asphalt Binder and Asphalt Mixture

The Performance and Distribution of Polyurethane-Modified Asphalt That Exhibits Different Molecular Weights

Influence on Polyurethane Synthesis Parameters Upon the Performance of Base Asphalt

Investigation on mechanism and rheological properties of Bio-asphalt/PPA/SBS modified asphalt