Abstract:In most designs of liquid metal blankets, the reduced activation ferritic-martensitic steel (RAFMS) with high relative magnetic permeability is proposed as the structural wall material, which will have an obvious influence on the magnetic field distribution inside the duct and consequently modify the liquid metal MHD flow state. However, the MHD flow state considering the influence of the ferromagnetic wall is lack of systematic investigations especially under the relevant conditions of magnetic confinement fusion reactors. In this work, systematic investigations on the ferromagnetic MHD effect are conducted by experiments and numerical simulations considering the relevant condition of fusion reactors such as high magnetic fields up to 10T and the actual magnetic permeability of ferromagnetic walls. It is found that magnetic field lines are mainly gathered through the side wall for ferromagnetic rectangular ducts, which will result in the overall magnetic shielding effect. As applied magnetic fields increase, the magnetic shielding effect weakens, increasing the aspect ratio and wall thickness of the duct is benefit to enhance the overall magnetic shielding effect. A slightly magnetic strengthening effect is firstly observed in our experimental and numerical investigations, which is characterized that the average magnetic flux intensity in the fluid region is slightly greater than applied magnetic fields and the pressure drop in ferromagnetic ducts is also higher than that in non-ferromagnetic ducts when the applied magnetic field is bigger than the threshold of transition. The dimensionless pressure gradient in ferromagnetic rectangular ducts usually increases firstly and then decreases with the increase of applied magnetic fields, the pressure drop estimated from the coefficient of the square of the average magnetic flux intensity in the fluid region is generally accurate with exceptions in some extreme conditions. These findings will provide a theoretical guidance for future liquid metal blanket designs.

Characterization of the MHD flow and pressure drop in the access ducts of a liquid metal fusion blanket

MHD Pressure Drop Measurement of PbLi Flow in Double-Bended Pipe

MHD flows through ferromagnetic rectangular ducts in liquid metal blankets

Experimental Investigation on Liquid-Metal Flow Distribution in Insulating Manifold under Uniform Magnetic Field

Numerical Study of Heat Flux Reduction Mechanism of the Counterflowing Jet in Rarefied Flows

Investigation of MHD flow balancing in electrically conductive manifolds of liquid metal blankets

Turbulent Heat Transfer for Coolant Water Flow in Plasma Facing Component

Direct Numerical Simulation of Unstable Stratified Turbulent Flow under a Magnetic Field

Direct numerical simulation of turbulent mixed convection in a vertical channel in a wall-normal magnetic field

DNS of MHD Turbulent Flow with Buoyancy

DNS of turbulent heat transfer under a uniform magnetic field at high Reynolds number

Experimental investigation of MHD flows in a WCLL TBM mock-up

Experimental, Numerical and Analytical Evaluation of J×b -Thrust for Fast-Liquid-metal-flow Divertor Systems of Nuclear Fusion Devices

Impact of Reverse Buoyancy on Heat and Mass Transfer in MHD Flow of PbLi Within a Poloidal Duct in a Typical DCLL Liquid Breeder Blanket

Turbulent Pipe Flow in a Transverse Magnetic Field: A Comparison Between PIV Measurement and DNS

Direct Numerical Simulation of Liquid Metal Free-Surface Turbulent Flows Imposed on Wall-Normal Magnetic Field

Discussion on heat transfer correlation in turbulent channel flow imposed wall-normal magnetic field

The influence of MHD boundary layers on tritium permeation in PbLi flows for fusion breeding blankets

Numerical and experimental analysis of magneto-convective flows around pipes

Unsteady Mixed Convection Flows in a Rectangular Duct and Dynamical Behaviors of Flow Channel Insert

On the use of CFD to obtain head loss coefficients in hydraulic systems and its application to liquid metal MHD flows in nuclear fusion reactor blankets