Abstract:In most designs of liquid metal blankets, the reduced activation ferritic-martensitic steel (RAFMS) with high relative magnetic permeability is proposed as the structural wall material, which will have an obvious influence on the magnetic field distribution inside the duct and consequently modify the liquid metal MHD flow state. However, the MHD flow state considering the influence of the ferromagnetic wall is lack of systematic investigations especially under the relevant conditions of magnetic confinement fusion reactors. In this work, systematic investigations on the ferromagnetic MHD effect are conducted by experiments and numerical simulations considering the relevant condition of fusion reactors such as high magnetic fields up to 10T and the actual magnetic permeability of ferromagnetic walls. It is found that magnetic field lines are mainly gathered through the side wall for ferromagnetic rectangular ducts, which will result in the overall magnetic shielding effect. As applied magnetic fields increase, the magnetic shielding effect weakens, increasing the aspect ratio and wall thickness of the duct is benefit to enhance the overall magnetic shielding effect. A slightly magnetic strengthening effect is firstly observed in our experimental and numerical investigations, which is characterized that the average magnetic flux intensity in the fluid region is slightly greater than applied magnetic fields and the pressure drop in ferromagnetic ducts is also higher than that in non-ferromagnetic ducts when the applied magnetic field is bigger than the threshold of transition. The dimensionless pressure gradient in ferromagnetic rectangular ducts usually increases firstly and then decreases with the increase of applied magnetic fields, the pressure drop estimated from the coefficient of the square of the average magnetic flux intensity in the fluid region is generally accurate with exceptions in some extreme conditions. These findings will provide a theoretical guidance for future liquid metal blanket designs.

Impact of Reverse Buoyancy on Heat and Mass Transfer in MHD Flow of PbLi Within a Poloidal Duct in a Typical DCLL Liquid Breeder Blanket

The influence of MHD boundary layers on tritium permeation in PbLi flows for fusion breeding blankets

Numerical Investigation of Buoyant Effect on Flow and Heat Transfer of Lithium–Lead Eutectic in DFLL–TBM

Unsteady Mixed Convection Flows in a Rectangular Duct and Dynamical Behaviors of Flow Channel Insert

Direct Numerical Simulation of Unstable Stratified Turbulent Flow under a Magnetic Field

DEM-CFD Simulation of Helium Flow Characteristics in Randomly Packed Bed for Fusion Reactors

Experimental Investigation on Liquid-Metal Flow Distribution in Insulating Manifold under Uniform Magnetic Field

DNS of MHD Turbulent Flow with Buoyancy

Investigation of MHD flow balancing in electrically conductive manifolds of liquid metal blankets

Direct numerical simulation of turbulent mixed convection in a vertical channel in a wall-normal magnetic field

Buoyancy Impact on Heat Transfer of Lead-Bismuth Eutectic for Nuclear Applications

DNS of Turbulent Mixed Convection over a Vertical Backward-Facing Step for Lead-Bismuth Eutectic

Experimental investigation of MHD flows in a WCLL TBM mock-up

Electromagnetic Field and Temperature Field Analysis of Coil Type Lead-Bismuth Electromagnetic Flowmeter

MHD Pressure Drop Measurement of PbLi Flow in Double-Bended Pipe

Characterization of the MHD flow and pressure drop in the access ducts of a liquid metal fusion blanket

ICONE19-43372 Numerical Simulation of Opposing Mixed Convection Heat Transfer of Lithium-Lead in a Vertical Square Channel with Heat Source

MHD flows through ferromagnetic rectangular ducts in liquid metal blankets

Axial Concentration of Dissolved Deuterium by Dispersion in a LiPb Experimental Loop

Numerical Analysis Of Forced Convection Heat Transfer In First Wall Rib-Roughened Channels For Liquid Lithium Lead Blanket

Numerical and experimental analysis of magneto-convective flows around pipes