Abstract:Ethylene, one of the most widely produced building blocks in the petrochemical industry, has received intense attention. Ethylene production, using electrochemical hydrogen pump-facilitated nonoxidative dehydrogenation of ethane (NDE) to ethylene, is an emerging and promising route, promoting the trans-formation of the ethylene industry from energy-intensive steam cracking process to new electrochemical membrane reactor technology. In this work, the NDE reaction is incorporated into a BaZr0.1Ce0.7 Y0.1Yb0.1O3-d electrolyte-supported protonic ceramic fuel cell membrane reactor to co-generate electric-ity and ethylene, utilizing the Nb and Cu doped perovskite oxide Pr0.6Sr0.4 Fe0.8Nb0.1Cu0.1O3-d(PSFNCu) as anode catalytic layer. Due to the doping of Nb and Cu, PSFNCu was endowed with high reduction toler-ance and rich oxygen vacancies, showing excellent NDE catalytic performance. The maximum power den-sity of the assembled reactor reaches 200 mW cm-2 at 750 degrees C, with high ethane conversion (44.9%) and ethylene selectivity (92.7%). Moreover, the nitrous oxide decomposition was first coupled in the protonic ceramic fuel cell membrane reactor to consume the permeated protons. As a result, the generation of electricity, ethylene and decomposition of nitrous oxide can be simultaneously obtained by a single reac-tor. Specifically, the maximum power density of the cell reaches 208 mW cm-2 at 750 degrees C, with high ethane conversion (45.2%), ethylene selectivity (92.5%), and nitrous oxide conversion (19.0%). This multi-win technology is promising for not only the production of chemicals and energy but also green-house gas reduction.(c) 2022 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.

Catalytic ceramic oxygen ionic conducting membrane reactors for ethylene production

Ion–Conducting Ceramic Membrane Reactors for the Conversion of Chemicals

Advances in Catalytic Polymer Membranes and Membrane Reactors

A novel zincum-doped perovskite-type ceramic membrane for oxygen separation

Catalytic mixed conducting ceramic membrane reactors for methane conversion

Ethylene Production from Oxidative Coupling of Methane in Solid Oxide Electrochemical Cells

Dense ceramic oxygen permeable membranes and catalytic membrane reactors

Mixed Oxygen Ionic and Electronic Conducting Membrane Reactors for Pure Chemicals Production

Simultaneous Generation of Electricity, Ethylene and Decomposition of Nitrous Oxide Via Protonic Ceramic Fuel Cell Membrane Reactor

Development and Intensification of the Ethylene Process Utilizing a Catalytic Membrane Reactor

Electrocatalytic CO2 Reduction to Ethylene: from Advanced Catalyst Design to Industrial Applications

Multi-channel ceramic catalytic membrane microreactors for highly efficient heterogeneous catalysis

Mixed-conducting ceramic membrane reactors for hydrogen production

High-Rate and Efficient Ethylene Electrosynthesis Using a Catalyst/Promoter/Transport Layer

Progress on Porous Ceramic Membrane Reactors for Heterogeneous Catalysis over Ultrafine and Nano-sized Catalysts

High Selectivity Of Oxidative Dehydrogenation Of Ethane To Ethylene In An Oxygen Permeable Membrane Reactor

Membrane-based Catalytic Partial Oxidation of Ethanol Coupled with Steam Reforming for Solid Oxide Fuel Cells

[Design of a New Type of Electrochemical Ceramic Membrane Oxygen Production System]

Silica-copper Catalyst Interfaces Enable Carbon-Carbon Coupling Towards Ethylene Electrosynthesis

CO Electrolysis to Multicarbon Products over Grain Boundary-Rich Cu Nanoparticles in Membrane Electrode Assembly Electrolyzers

Continuous Oxygen Ion Transfer Medium As a Catalyst for High Selective Oxidative Dehydrogenation of Ethane