Abstract:Resistive random access memory (RRAM) devices are being investigated extensively for future nonvolatile memories using various transition metal oxides like NiO, ZnO, TiO 2 , and HfO 2 as the active material. Here, we have demonstrated the performance of RRAM devices using HfO 2 thin films deposited by the ion beam sputtering technique on p ++ -Si (100) substrate with varying thickness from 10 to 30 nm. The density of these films is calculated to be in the range of 9.1-8.6 g/cm 3 . A drastic change in the average grain size from ∼90 to ∼2000 nm is noticed when the thickness is increased from 20 to 30 nm. We observe a structural transformation from orthorhombic to a dominant monoclinic phase with an increase in thickness from 20 to 30 nm, although a small fraction of the orthorhombic phase remains present in the later film. The phase transformation is accompanied by a significant increase in the average grain size along with a decrease in the oxygen vacancy, as observed from X-ray photoelectron spectroscopy. Further, a red shift in the absorption peak and a reduced band gap of HfO 2 film having 30 nm thickness well corroborates with the above fact. We examine the bipolar forming-free resistive switching performance of the RRAM devices fabricated using these films by measuring 100 I–V cycles. Among all films, the film of 20 nm thickness shows better switching behavior with an ON/OFF ratio of ∼7 attributed to the appropriate grain size, enhanced crystallization, and oxygen vacancies. The endurance and retention measurements show the excellent reliability of the 20 nm thick device. Schematically, the switching mechanism has been discussed based on the Ohmic and Poole-Frenkel conduction models, which is attributed to the formation and rupture of conductive filaments consisting of oxygen vacancies.

Threshold Switching and Resistive Switching in SnO2-HfO2 Laminated Ultrathin Films

Resistive Switching Properties Of Polycrystalline Hfoi(X)N(Y) Films By Plasma-Enhanced Atomic Layer Deposition

Nanostructures Stacked on Hafnium Oxide Films Interfacing Graphene and Silicon Oxide Layers as Resistive Switching Media

Nanoscale observations of resistive switching high and low conductivity states on TiN/HfO2/Pt structures.

Thin-film design of amorphous hafnium oxide nanocomposites enabling strong interfacial resistive switching uniformity

Bipolar Resistive Switching in BiFe 0.95 Zn 0.05 O 3 Films

Structural, Optical, Electrical and Resistive Switching Properties of Zno Thin Films Deposited by Thermal and Plasma-Enhanced Atomic Layer Deposition

Impact of Non‐Stoichiometric Phases and Grain Boundaries on the Nanoscale Forming and Switching of HfOx Thin Films

Thickness Effect on the Stability of Unipolar Resistance Switching in Tin Ferrite Thin Films

Resistive Switching Characteristics Of Hfo2 Thin Films On Mica Substrates Prepared By Sol-Gel Process

Magnetron-Sputtered SnO Thin Films for p-Type and Ambipolar TFT Applications

Effects of Annealing Conditions on Resistive Switching Characteristics of SnOx Thin Films

Electrical Switching of Al-Doped Amorphous SiO<sub>x</sub> Thin Films

Improving HfO 2 -Based Resistive Switching Devices by Inserting a TaO x Thin Film via Engineered In Situ Oxidation

Thickness dependent phase transformation and resistive switching performance of HfO 2 thin films

Unidirectional Threshold Resistive Switching in Au/NiO/Nb:SrTiO3 Devices

Study of resistive switching behavior in HfO2 nanocrystals synthesized via a low temperature hydrothermal method

Resistive Switching in FeNi/Al2O3/NiO/Pt Structure with Various Al2O3 Layer Thicknesses

Resistive switching properties in polycrystalline LiNbO3 thin films

Bipolar Resistive Switching Characteristics Of Low Temperature Grown Zno Thin Films By Plasma-Enhanced Atomic Layer Deposition

Engineering of Self-Rectifying Filamentary Resistive Switching in LiNbO3 Single Crystalline Thin Film Via Strain Doping