Abstract:This paper presents a transistor open-circuit fault diagnosis method based on an average model and post-fault reconfiguration algorithms for a grid-tied single-phase inverter that transfers power bi-directionally. The transistor open-circuit fault occurrence is detected by comparing the average bridge arm pole-to-pole voltage deviation and threshold first. Then, the exact faulty transistor is identified by developed algorithms based on post-fault reconfiguration of control (PFRC) and of utilizing redundant leg (PFRUR). These two fault identification algorithms are suitable for different situations. Compared with the PFRUR, the PFRC can identify the faulty transistor without the help of redundant leg, but the identification time is longer. For inverters equipped with redundant leg already, the PFRUR can achieve faster identification speed so that inverters in reliability-oriented applications can return to normal operation after fault with short interruption. With average model, this method only requires existing signals sampled for control, thus it can be embedded in system easily without adding extra sensors and diagnosis circuits. The sampling frequency can be as low as switching frequency. Furthermore, this method is suitable for both inverters with L or LCL filters. Finally, experiments are carried out on a 550-W/10-kHz grid-tied single-phase inverter to verify the effectiveness.

Online fault diagnosis method for grid-tied T-type inverters based on specific frequency calculation

An Average Model-Based Transistor Open-Circuit Fault Diagnosis Method for Grid- Tied Single-Phase Inverter

L- and LCL-Filtered Grid-Tied Single-Phase Inverter Transistor Open-Circuit Fault Diagnosis Based on Post-Fault Reconfiguration Algorithms

An Igbt Open-Circuit Fault Diagnosis Method For Grid-Tied T-Type Three-Level Inverters

Fast Transistor Open-Circuit Faults Diagnosis in Grid-Tied Three-Phase VSIs Based on Average Bridge Arm Pole-to-Pole Voltages and Error-Adaptive Thresholds

A Voltage Vector Residual Estimation Method Based on Current Path Tracking for T-Type Inverter Open-Circuit Fault Diagnosis

A Comparative Study of Two Diagnostic Methods Based on the Switching Voltage Pattern for Igbt Open-Circuit Faults in Voltage-Source Inverters

Fast Diagnosis of Multiple Open-Circuit Faults in a T-type Inverter Based on Voltages Across Half-Bridge Switches

A Simple and Effective Open-Circuit-Fault Diagnosis Method for Grid-Tied Power Converters—A New Technique Based on Tellegen's Theorem

Real-time Diagnosis of Multiple Transistor Open-Circuit Faults in a T-type Inverter Based on Finite-State Machine Model

Open-transistor Faults Diagnosis in Voltage-Source Inverter Based on Phase Voltages with Sliding-Window Counting Method.

Design of Grid-tied Inverters with the Functions of Reactive and Harmonic Compensation

A Fast Average Model-Based Method for IGBT and Current Sensor Fault Diagnosis in Grid- Tied Inverters.

Real-time open-circuit fault diagnosis method for T-type rectifiers based on median current analysis

Study on the Over-Voltage and Over-Current of Grid-Connected Inverters in Non-Fault Conditions

A Fast Diagnosis Method for Both IGBT Faults and Current Sensor Faults in Grid-Tied Three-Phase Inverters With Two Current Sensors

An Online Multiple Open-Switch Fault Diagnosis Method for T-Type Three-Level Inverters Based on Multimodal Deep Residual Filter Network

An Optimized Fault Feature Extraction Method for PV Grid-Connected T-Type Three Level Inverter

A Data-Driven Open-Circuit Fault Diagnosis Method for Three-Phase T-type Three-level Inverters

Inter-turn Fault Detection for the Inverter-Fed Induction Motor Based on the Teager-Kaiser Energy Operation of Switching Voltage Harmonics

Fast Open-Transistor Fault Diagnosis Based On Calculated Bridge Arm Pole-To-Pole Voltages In Voltage-Source Inverters