Abstract:This paper presents a transistor open-circuit fault diagnosis method based on an average model and post-fault reconfiguration algorithms for a grid-tied single-phase inverter that transfers power bi-directionally. The transistor open-circuit fault occurrence is detected by comparing the average bridge arm pole-to-pole voltage deviation and threshold first. Then, the exact faulty transistor is identified by developed algorithms based on post-fault reconfiguration of control (PFRC) and of utilizing redundant leg (PFRUR). These two fault identification algorithms are suitable for different situations. Compared with the PFRUR, the PFRC can identify the faulty transistor without the help of redundant leg, but the identification time is longer. For inverters equipped with redundant leg already, the PFRUR can achieve faster identification speed so that inverters in reliability-oriented applications can return to normal operation after fault with short interruption. With average model, this method only requires existing signals sampled for control, thus it can be embedded in system easily without adding extra sensors and diagnosis circuits. The sampling frequency can be as low as switching frequency. Furthermore, this method is suitable for both inverters with L or LCL filters. Finally, experiments are carried out on a 550-W/10-kHz grid-tied single-phase inverter to verify the effectiveness.

Fast Diagnosis of Multiple Open-Circuit Faults in a T-type Inverter Based on Voltages Across Half-Bridge Switches

Real-time Diagnosis of Multiple Transistor Open-Circuit Faults in a T-type Inverter Based on Finite-State Machine Model

A Comparative Study of Two Diagnostic Methods Based on the Switching Voltage Pattern for Igbt Open-Circuit Faults in Voltage-Source Inverters

Fast Transistor Open-Circuit Faults Diagnosis in Grid-Tied Three-Phase VSIs Based on Average Bridge Arm Pole-to-Pole Voltages and Error-Adaptive Thresholds

Fast Open-Transistor Fault Diagnosis Based On Calculated Bridge Arm Pole-To-Pole Voltages In Voltage-Source Inverters

A fault-tolerant T-type three-level inverter system

A Voltage Vector Residual Estimation Method Based on Current Path Tracking for T-Type Inverter Open-Circuit Fault Diagnosis

Open-transistor Faults Diagnosis in Voltage-Source Inverter Based on Phase Voltages with Sliding-Window Counting Method.

An Average Model-Based Transistor Open-Circuit Fault Diagnosis Method for Grid- Tied Single-Phase Inverter

A fast diagnosis method for Power Switch faults in inverter based on DC voltage waveform

Fast Diagnosis and Location Method for Open-Circuit Fault in Inverter Based on Current Vector Character Analysis

L- and LCL-Filtered Grid-Tied Single-Phase Inverter Transistor Open-Circuit Fault Diagnosis Based on Post-Fault Reconfiguration Algorithms

A Fast Average Model-Based Method for IGBT and Current Sensor Fault Diagnosis in Grid- Tied Inverters.

An Igbt Open-Circuit Fault Diagnosis Method For Grid-Tied T-Type Three-Level Inverters

Switching Function Model-Based Fast-Diagnostic Method Of Open-Switch Faults In Inverters Without Sensors

Fault diagnosis scheme for open-circuit faults in switched reluctance motor drives using fast Fourier transform algorithm with bus current detection

Hardware-circuit-based diagnosis method for open-switch faults in inverters

Diagnosis Method for Inverter Open-circuit Fault Based on Switching Function Model

Recovering Partial Three-Level Operation in a T-Type Inverter with Fault Management Redundant Unit

A Redundant Unit to Form T-Type Three-Level Inverters Tolerant of IGBT Open-Circuit Faults in Multiple Legs

Offline Fault Diagnosis for 2-Level Inverter: Short-Circuit and Open-Circuit Detection