Abstract:This paper proposes an inverter open circuit fault diagnosis method based on residual performance evaluation. The fault detection is derived by comparing residual performance with the threshold. Besides, a current interval sliding mode observer is designed in the residual generation process. Because of uncertain random noise and unknown disturbance, the observer‐based inverter fault diagnosis meets the problems of large deviation of current observation value and high false alarm rate. An inverter open‐circuit fault diagnosis method is proposed via residual performance evaluation. Firstly, the interval sliding mode observer is constructed by combining the interval observer with the sliding mode observer. Three phase current estimates are obtained and current residuals are calculated. Secondly, the residual performance indicators are calculated using the evaluation function. The fault detection is derived by comparing residual performance with the threshold. Thirdly, a residual information table is established based on the fault information contained in the residual for fault isolation. Finally, the proposed algorithm is validated on simulation and physical platforms. Compared with traditional observer‐based diagnostic methods, the introduction of residual performance evaluation improves the diagnostic speed by more than 50%. The interval sliding mode observer has higher estimation accuracy and anti‐interference ability in the presence of noise and external disturbances.

Open-transistor Faults Diagnosis in Voltage-Source Inverter Based on Phase Voltages with Sliding-Window Counting Method.

A Comparative Study of Two Diagnostic Methods Based on the Switching Voltage Pattern for Igbt Open-Circuit Faults in Voltage-Source Inverters

Fast Transistor Open-Circuit Faults Diagnosis in Grid-Tied Three-Phase VSIs Based on Average Bridge Arm Pole-to-Pole Voltages and Error-Adaptive Thresholds

Novel Method for Detecting Synchronous Phases and Instantaneous Symmetrical Components

An Average Model-Based Transistor Open-Circuit Fault Diagnosis Method for Grid- Tied Single-Phase Inverter

Fast Open-Transistor Fault Diagnosis Based On Calculated Bridge Arm Pole-To-Pole Voltages In Voltage-Source Inverters

Fault Analysis and Fault-tolerant Design for Parallel Redundant Inverter Systems

L- and LCL-Filtered Grid-Tied Single-Phase Inverter Transistor Open-Circuit Fault Diagnosis Based on Post-Fault Reconfiguration Algorithms

Real-time Diagnosis of Open Circuit Faults in Three-Phase Voltage Source Inverters

Real-time Diagnosis of Multiple Transistor Open-Circuit Faults in a T-type Inverter Based on Finite-State Machine Model

Fast Diagnosis of Multiple Open-Circuit Faults in a T-type Inverter Based on Voltages Across Half-Bridge Switches

A Simple and Efficient Strategy for Online Detection of Multiple Open-Switch Fault in Multiphase Machine Drive Systems

A Voltage Vector Residual Estimation Method Based on Current Path Tracking for T-Type Inverter Open-Circuit Fault Diagnosis

Fault Analysis on Conventional Parallel Inverter Systems

A Fast Average Model-Based Method for IGBT and Current Sensor Fault Diagnosis in Grid- Tied Inverters.

Multiple Open-Switch Fault Diagnosis for Three-Phase Four-Leg Inverter under Unbalanced Loads via Interval Sliding Mode Observer

Fault Diagnosis for VSC-HVDC Using Wavelet Transform

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

A Nonintrusive IGBT Open-Circuit Fault and Current Sensor Fault Diagnosis Method for Grid-Tied Three-phase Three-Wire Inverter with Two Current Sensors

Inverter open circuit fault diagnosis based on residual performance evaluation

A Fast Diagnosis Method for Both IGBT Faults and Current Sensor Faults in Grid-Tied Three-Phase Inverters With Two Current Sensors