Abstract:The microstructure and properties of cobalt-free cost-effective AlCrFe2Ni2 high entropy alloy (HEA) in the as-cast condition and after thermo-mechanical processing by severe cold-rolling and annealing were investigated in the present work. The as-cast HEA showed a heterogeneous microstructure consisting of relatively coarse lamellar and much finer intertwined regions. The coarse regions consisted of eutectic mixture of FCC and ordered B2 (along with minor BCC) phases. The FCC phase was enriched in Fe and Cr, while the B2 phase was found enriched in Ni and Al but depleted in Cr. The BCC/B2 phase in the as-cast material showed phase separation due to spinodal decomposition to two different B2 phases in the fine regions. The overall FCC phase and BCC/B2 phase fractions were ∼60% and 40%, respectively. Despite the complex microstructure, the presence of a high fraction of the ductile FCC phase rendered remarkable workability, allowing heavy cold-rolling up to 90% reduction in thickness. Heavy deformation resulted in the development of intriguing microstructural features such as folding and bending of the lamellae, local shearing, and finally, deformation-induced nanocrystallization of the FCC phase. However, the B2 phase retained the ordered structure even after 90% cold-rolling. Annealing at 800 °C resulted in the formation of an ultrafine microduplex structure with significant resistance to grain growth even up to an annealing temperature of 1200 °C. A high yield (∼880 MPa) and tensile strength (̴ 1100 MPa) coupled with appreciable elongation (∼10%) could be achieved after annealing at 800 °C. The tensile properties obtained were superior to the other cobalt-free HEAs, which indicate the promising application of the cobalt-free cost-effective AlCrFe2Ni2 HEA as an advanced structural material.

Effects of vacuum heat treatment on novel Co-free Al0·9Cr0·8FeMn0·8Ni2.0 eutectic high entropy alloy: Microstructure evolution and mechanical properties

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Microstructure and mechanical properties of Co-free AlCrFeNiTi 0.2 eutectic high-entropy alloy

Hot deformation characteristics and microstructure evolution of Al20Co36Cr4Fe4Ni36 eutectic high entropy alloy

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Effect of Heat Treatment on Microstructure and Mechanical Properties of Direct Energy Deposited AlCoCrFeNi2.1

Evolution of microstructure and mechanical properties of a novel CoCrFeNi2(TiSi)0.7 EHEA under different annealing conditions

Effect of Heat Treatment on the Microstructure and Mechanical Properties of the Al0.6CoCrFeNi High-Entropy Alloy

A novel Co-free Al0.75CrFeNi eutectic high entropy alloy with superior mechanical properties

Microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high-entropy alloy synthesized by spark plasma sintering of gas-atomized powder

Microstructure evolution and mechanical properties of CrFeNixV0.64Ta0.36 eutectic high-entropy alloys

Unleashing the microstructural evolutions during hot deformation of as-cast AlCoCrFeNi 2.1 eutectic high entropy alloy

Effects of Cr Content on Microstructure and Mechanical Properties of Co-Free FeCryNiAl0.8 High-Entropy Alloys

Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing

Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment

Effect of Co on phase stability and mechanical behavior of CoxCrFeNiMnAl0.3 high entropy alloys with micro/nano hierarchical structure

Effect of Alloying on Microstructure and Mechanical Properties of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy

The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al0.6CoFeNi2V0.5 High Entropy Alloy

Microstructure and mechanical properties variation with Ni content in Al0.8CoCr0.6Fe0.7Nix (x = 1.1, 1.5, 1.8, 2.0) eutectic high-entropy alloy system

Microstructure and properties of a novel cost-effective FeNi-based eutectic high entropy alloys

Study on the strengthening mechanism of AlCoCrFeNi2.1 eutectic high-entropy alloy