Abstract:Copper oxide was synthesis by hydrothermal method using copper nano powder (30nm) and deionized water on quartz substrate. At temperature 100 °C, different experimental time ranging from (24–72 h). Different copper oxide phase was presented in X-Ray diffraction analyzer, the crystal size increased as the reaction time increased as it calculated using scherrer equation to be (21.1–32.03 nm), and Williamson Hall plot to be (40.3–87.7 nm). Also, Raman spectroscopy show different copper phase and the highest intensity peak at 220 cm −1 , due to the cuprous oxide in all sample used to distinct chemical fingerprint for a particular molecule or material. Many of metal oxide bond was study by FTIR to clarify the compositional and chemical properties of the prepared samples. Optical characteristic with different absorption peaks of thin film show decrease in the band gap from (2.8–2.4 eV) as the reaction time increase. PL measurement used also to determine the band gap energy of the prepared thin film which found to be agreement with UV–Vis, and the band gap value is (2.7, 2.6, 2.5, 2.3, and 2.3 eV), respectively. Increasing in the surface roughness from (3.637–25.16 nm), and in the root mean square from (5–29.39 nm), and grain size with increasing the reaction time from (24–72 h), respectively, was measured by using AFM technique. Different morphologies were showed with increasing the reaction time, spherical and truncated octahedral in different type was obtained by field emission-scanning electron microscope (FE-SEM) as the particles subject to transformation caused the preparing agglomerated crystallites. The electrical characteristic was analysis use DC measurement to measure the activation energy which varied with reaction time. The figure of merit analysis shows that the copper oxidation state to obtain cuprous oxide (Cu 2 O) is mainly obtained at the 48 h-reaction time. The used of copper nano powder in hydrothermal method without adding any auxiliary material the main aim of this research.

Impact of Decoration Method on Some Physical Properties of Ag@Cu2O Nanostructure

Preparation of CuO-Ag/SiO2 nano-composites via adsorption phase reaction technique

Improved Physical Properties of Ag-Cu2O Hybrid Structure Prepared Using Laser Ablation in Liquid Technique

Effects of Ag Nanoparticles on the Visible-Light-driven Photocatalytic Properties of Cu2O Nanocubes

Influence of copper species on silver grain size in Ag–CuO–SiO2 ternary nanocomposites

Electrodeposition of AgCuO2 Nanoplates

Green Synthesis of Cu2O@Ag Core-Shell Nanocomposite with Enhanced Visible-Light Absorption

Synthesis and Properties of Cu2 (OH)3NO3/Ag Composite

Deposition time effect on copper oxide nano structures, an analysis study using chemical method

A novel wet-chemical method of preparing highly monodispersed Cu2O nanoparticles

High Spatially Resolved Morphological, Structural and Spectroscopical Studies on Copper Oxide Nanocrystals.

Preparation, physical, optical, ESR and γ-ray attenuation efficacy investigation of copper oxide/silver borosilicate glass

Microwave-assisted synthesis of tentacles like Ag-doped copper oxide nano-ceramics: Structural, optical, and anti-campylobacter studies

Microstructural, mechanical and wear behavior of electroless assisted silver coated Al2O3–Cu nanocomposites

Synthesis and characterization of ZNO: CU and AG bimetallics nanoparticles by sol gel method

Synthesis and Characterization of MCM-41 Decorated with CuO Particles

Electrochemical fabrication of Ag–Cu nano alloy and its characterization: an investigation

Studies on the Structural, Morphological, Optical, Electro Chemical and Antimicrobial Activity of Bare, Cu and Ag @ WO3 Nanoplates by Hydrothermal Method

Synthesis of Multi-walled Carbon Nanotubes Decorated with ZnO/Ag Nanoparticles by Co-precipitation Method

Green Sonochemical Synthesis of Cupric and Cuprous Oxides Nanoparticles and Their Optical Properties

Photocatalytic Degradation of Cuprous Oxide Nanostructures Under UV/Visible Irradiation