Abstract:Different weight ratios of Cu-silver-doped and non-doped ZnO nanoparticles were created, By using XRD, FTIR, UV-visible spectroscopy, FESEM, and EDS the presence of nanoparticles in the sol-gel (ZnO) and (ZnO: Ag and Cu) techniques was confirmed, the JCPDS standard card for Zn (01-080-0074) validated the hexagonal ZnO structure by X-ray diffraction for (ZnO) and (ZnO:Ag and Cu). we calculated the average crystal size of all the produced samples, and we observe that the crystal size grows as the ratio of copper and silver doping rises. According to the FTIR data, O-H expansion is responsible for the expected distinctive absorption band in the vicinity of (3090-3665 cm). Because KBr quickly absorbs CO, it is possible that the peaks in the range (1550-1630 cm) are caused by the KBr utilized. These peaks are related to the stretching vibrations of C=O that are symmetric and asymmetric. The stretching vibration of the ZnO bond can be seen in the form of a prominent peak in the (350–780 cm) range. When Ag and Cu are entered to the doped ZnO samples, the peak strength declines, indicating the start of Ag and Cu clusters on the surface of ZnO nanoparticles. The bond position was shifted as a result of alteration in bond length brought about by the substitution of Ag+ ions at the ZnO lattice sites. According to the UV-VIS measurements, pure ZnO has a peak at 370 nm that becomes red at 569 nm. With increasing concentrations of Ag and Cu, the nanocomposites show high absorption in the visible region because the peaks shift monotonously to longer wavelengths and cause the energy gap value to decrease by 3, 2.958, 2.76, 2.74, 2.69, and 2.5 eV, respectively. According to the FESEM data from IMAGE J, the nanoparticles have a spherical or nearly spherical form. Zn, Ag, and Cu elements may be seen in the EDS data.

Synthesis and Properties of Cu2 (OH)3NO3/Ag Composite

Preparation of CuO-Ag/SiO2 nano-composites via adsorption phase reaction technique

Synthesis of CuO/SiO2 nanocomposite material using adsorption method

Electrodeposition of AgCuO2 Nanoplates

Preparation of AgSnO2 Nano-Composite Powder by Wet Chemical Method

Preparation of AgSnO_2 nano-composite powder by wet chemical method

Controllable Sonochemical Synthesis Of Cu2o/Cu-2(Oh)(3)No3 Composites Toward Synergy Of Adsorption And Photocatalysis

Copper nitride/silver nanostructures synthesized via wet chemical reduction method for the oxygen reduction reaction

Preparation of Ag-Al2O3 nano-composites powder

One-Pot Fast Synthesis of Leaf-Like CuO Nanostructures and CuO/Ag Microspheres with Photocatalytic Application

Synthesis of Ag−Cu−MnO Triple‐Metal Composite And Evaluation of its Antimicrobial Activity and Dye Removal Efficacy

Preparation of 26-facet Cu2O@Cu composite and its methyl orange adsorption behavior

Impact of Decoration Method on Some Physical Properties of Ag@Cu2O Nanostructure

Preparation of porous CuS/modified-diatomite composite via a facile in situ loading process for efficient recovery of silver ion from aqueous solution

Synthesis of a Binuclear Copper(ii) Compound and Its Use As a Copper Source for Preparation of an Environmental Catalyst

Synthesis of CuO/g‐C3N4 Composite with High Anti‐interference Ability for Enhanced Fenton‐like Catalysis

Cu(II)-Based Metal–Organic Framework Loaded with Silver Nanoparticles As a Catalyst for the A3-Coupling Reaction

Synthesis and characterization of ZNO: CU and AG bimetallics nanoparticles by sol gel method

Polyol synthesis and chemical conversion of Cu 2 O nanospheres

A green and facile synthesis route of nanosize cupric oxide at room temperature

Synthesis of copper-silver-zinc oxide nanocomposites for 4-nitrophenol reduction: doping and heterojunction