Abstract:Silicon photonics devices benefit greatly from a partially etched platform and inverse design. Herein, we propose a bi-layer polarization splitter and rotator with a topology pattern and demonstrate it on a silicon-on-insulator platform. Our device exhibits a significantly reduced physical footprint of only 2µm×6µm, compared to traditional directional couplers and tapered waveguides. The device accomplishes the functions of polarization conversion and separation in such a compact design without redundant tapered or bending waveguides. The tested minimum insertion loss with the fabrication batch reaches 0.57 and 0.67 dB for TE and TM modes, respectively. The TE mode demonstrates a wider bandwidth and lower ILs than the TM modes, averaging around 1 dB from 1530 to 1565 nm. The M modes exhibit approximately 2 dB ILs at the same wavelength range, decreasing to about 1 dB between 1565 and 1580 nm. Improved designs and fabrication conditions strongly suggest the potential for further performance enhancement in the device. This successful initiative validates the exceptional performance resulting from the integration of the partially etched platform and inverse design, providing valuable insights for future photonic integrated device designs.

Inverse design of a silicon-based ultra-compact four-channel mode splitter with dual polarizations

Improved Inverse Design of Polarization Splitter with Advanced Bayesian Optimization

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Design of an Ultra-Broadband Silicon Mode (De)multiplexer

Ultra-compact and Broadband Polarization-Insensitive Mode-Order Converting Power Splitter

Inverse design of highly efficient and broadband mode splitter on SOI platform

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Ultra-compact Silicon Mode (de)multiplexer Based on Directional Couplers with Subwavelength Sidewall Corrugations

Direct-binary-search-optimized Compact Silicon-Based Polarization Beam Splitter Using a Pixelated Directional Coupler

Integrating Inverse Design and Partially-etched Platform: An Ultra-compact Polarization Splitter and Rotator as An Example

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

A novel polarization and dichroic dual-functional splitter with ultra-high splitting ratios

Ultra-compact and Low-Loss Silicon Polarization Beam Splitter Using a Particle-Swarm-optimized Counter-Tapered Coupler.

Ultra-compact broadband polarization beam splitter with strong expansibility

A Compact SOI Polarization Beam Splitter Based on Multimode Interference Coupler

Silicon Photonic Devices for Wavelength/Mode/Polarization Multiplexing

On-chip silicon 8-channel hybrid (de)multiplexer enabling simultaneous mode- and polarization-division-multiplexing: On-chip Si 8-channel hybrid (de)multiplexer for mode-/polarization-division-multiplexing

Compact and Low Loss Silicon-Integrated Polarization Beam Splitter Developed by Efficient Semi-Inverse Design Approach

Silicon Mode (de)multiplexers with Parameters Optimized Using Shortcuts to Adiabaticity.

Design of Silicon Photonic Wavelength Conversion Chip for Mode-division Multiplexing Signals