Abstract:The process of in-situ oil shale extraction via convection heating is accompanied by complex solid–fluid-thermal-mass transfer multi-field coupling effects. As the fluid temperature increases, thermal cracking and pyrolysis occur within the oil shale, forming a highly permeable and porous structure, resulting in the oil shale being subjected to complex stress field changes. This paper, set against the background of the in-situ oil shale extraction process using steam injection, conducts uniaxial compression tests on oil shale under different bedding directions under the real-time action of high-temperature steam. Combined with micro-CT, XRD and XPS analysis of oil shale, the characteristics of anisotropic evolution of compressive strength of oil shale under the real-time action of high-temperature steam and the internal mechanisms occurring are clarified. As the steam temperature increases, the compressive strength and elastic modulus of oil shale in different bedding directions show a trend of decreasing and then increasing, reaching their lowest values at a steam temperature of 400 °C. The rate of change in compressive strength of oil shale perpendicular and parallel to the bedding direction differs significantly at different pyrolysis stages. When the steam temperature exceeds 400 °C, the rate of increase in compressive strength of oil shale in the vertical bedding direction is significantly higher than in the parallel bedding direction. At high temperatures, the fracturing of oil shale is primarily along the bedding planes, while the development of interlayer fractures is relatively slow, resulting in higher strength of oil shale in the vertical bedding direction. The failure characteristics of oil shale perpendicular to the bedding direction transition from brittle shear fracturing to semi-brittle shear fracturing and then to plastic deformation, eventually returning to semi-brittle shear fracturing. In contrast, the failure characteristics of oil shale parallel to the bedding direction transition from brittle shear fracturing through semi-brittle shear fracturing to plastic deformation. During pyrolysis process, the content of clay minerals inside the oil shale does not change significantly, but the change in non-clay minerals is most pronounced. When the temperature exceeds 400 °C, the diffraction-peak intensity of pyrite suddenly decreases or even disappears, the diffraction-peak intensity of kaolinite gradually decreases, and the content changes of elements such as C, O, Al, Si are also more noticeable. The transformation of internal mineral composition in oil shale (e.g., the conversion of kaolinite to metakaolinite) is the fundamental reason for the strength increase of oil shale at temperatures above 400 °C.

Research on the inherent mechanism of rock mass deformation of oil shale in-situ mining under the condition of thermal-fluid-solid coupling

Study on the nonlinear time-dependent deformation characteristics and viscoelastic-plastic model of shale under direct shear loading path

Investigating fracture initiation and propagation in deep buried shale due to thermal shock: a numerical approach

Numerical simulation and thermo-hydro-mechanical coupling model of in situ mining of low-mature organic-rich shale by convection heating

Study on rock mechanics characteristics of deep shale in Luzhou block and the influence on reservoir fracturing

Experimental and numerical study on dynamic mechanical behaviors of shale under true triaxial compression at high strain rate

Comparative investigation of in situ hydraulic fracturing and high-temperature steam fracturing tests for meter-scale oil shale

Experimental and constitutive modeling of the anisotropic mechanical properties of shale subjected to thermal treatment

Characterization of fracture and percolation processes in oil shale under conduction and convection heating modes based on micro-CT technology

The Effect of Hydraulic Coupling on Mechanical Deformation Characteristics of Shallow Coal Seam in Western Mining Area

Study on the influence of thermo-pressure coupling environment on the fracture properties of shale in deep reservoirs

Study on Geological Deformation of Supercritical CO2 Sequestration in Oil Shale after In Situ Pyrolysis

Research on the Mechanical Properties and Anisotropy Evolution of Uniaxial Compression of Oil Shale Under Real-Time High-Temperature Steam

Combined Effect of In Situ Stress Level and Bedding Anisotropy on Hydraulic Fracture Vertical Growth in Deep Marine Shale Revealed via CT Scans and Acoustic Emission

Hydraulic fracturing behaviors of shale under coupled stress and temperature conditions simulating different burial depths

Experimental Investigation of Anisotropic Thermal Deformation of Oil Shale Under High Temperature and Triaxial Stress Based on Mineral and Micro-fracture Characteristics

A new rock physics model for fractured oil shale reservoirs in Mahu oil field

Thermal-hydraulic-mechanical coupling mechanical behavior and acoustic emission characteristics of deep sandstone

Gas flow and solid deformation in unconventional shale

Mechanical Characteristics of Coal and Rock in Mining under Thermal-Hydraulic-Mechanical Coupling and Dynamic Disaster Control