Abstract:The process of in-situ oil shale extraction via convection heating is accompanied by complex solid–fluid-thermal-mass transfer multi-field coupling effects. As the fluid temperature increases, thermal cracking and pyrolysis occur within the oil shale, forming a highly permeable and porous structure, resulting in the oil shale being subjected to complex stress field changes. This paper, set against the background of the in-situ oil shale extraction process using steam injection, conducts uniaxial compression tests on oil shale under different bedding directions under the real-time action of high-temperature steam. Combined with micro-CT, XRD and XPS analysis of oil shale, the characteristics of anisotropic evolution of compressive strength of oil shale under the real-time action of high-temperature steam and the internal mechanisms occurring are clarified. As the steam temperature increases, the compressive strength and elastic modulus of oil shale in different bedding directions show a trend of decreasing and then increasing, reaching their lowest values at a steam temperature of 400 °C. The rate of change in compressive strength of oil shale perpendicular and parallel to the bedding direction differs significantly at different pyrolysis stages. When the steam temperature exceeds 400 °C, the rate of increase in compressive strength of oil shale in the vertical bedding direction is significantly higher than in the parallel bedding direction. At high temperatures, the fracturing of oil shale is primarily along the bedding planes, while the development of interlayer fractures is relatively slow, resulting in higher strength of oil shale in the vertical bedding direction. The failure characteristics of oil shale perpendicular to the bedding direction transition from brittle shear fracturing to semi-brittle shear fracturing and then to plastic deformation, eventually returning to semi-brittle shear fracturing. In contrast, the failure characteristics of oil shale parallel to the bedding direction transition from brittle shear fracturing through semi-brittle shear fracturing to plastic deformation. During pyrolysis process, the content of clay minerals inside the oil shale does not change significantly, but the change in non-clay minerals is most pronounced. When the temperature exceeds 400 °C, the diffraction-peak intensity of pyrite suddenly decreases or even disappears, the diffraction-peak intensity of kaolinite gradually decreases, and the content changes of elements such as C, O, Al, Si are also more noticeable. The transformation of internal mineral composition in oil shale (e.g., the conversion of kaolinite to metakaolinite) is the fundamental reason for the strength increase of oil shale at temperatures above 400 °C.

Experimental Investigation of Anisotropic Thermal Deformation of Oil Shale Under High Temperature and Triaxial Stress Based on Mineral and Micro-fracture Characteristics

Experimental Investigation of the Anisotropic Evolution of Tensile Strength of Oil Shale Under Real-Time High-Temperature Conditions

Experimental investigation on anisotropic permeability and its relationship with anisotropic thermal cracking of oil shale under high temperature and triaxial stress

Research on the Mechanical Properties and Anisotropy Evolution of Uniaxial Compression of Oil Shale Under Real-Time High-Temperature Steam

Influence of Temperature and Bedding Planes on the Mode I Fracture Toughness and Fracture Energy of Oil Shale Under Real-Time High-Temperature Conditions

Real-time evolution of oil shale meso-structure under triaxial stress condition

Evolution of Pore and Fracture Structure of Oil Shale under High Temperature and High Pressure

Numerical Investigation of the in Situ Oil Shale Pyrolysis Process by Superheated Steam Considering the Anisotropy of the Thermal, Hydraulic, and Mechanical Characteristics of Oil Shale

Experimental investigation on micro-fracture evolution and fracture permeability of oil shale heated by water vapor

Investigation on the Fracture-Pore Evolution and Percolation Characteristics of Oil Shale under Different Temperatures

Characterization of fracture and percolation processes in oil shale under conduction and convection heating modes based on micro-CT technology

Microstructural Imaging and Characterization of Oil Shale Before and after Pyrolysis

Experimental study on the effects of steam temperature on the pore-fracture evolution of oil shale exposed to the convection heating

Experimental and constitutive modeling of the anisotropic mechanical properties of shale subjected to thermal treatment

Reservoir-scale study of oil shale hydration swelling and thermal expansion after hydraulic fracturing

Thermo-mechanical characterization of shale using nanoindentation

Influence of Pyrolysis Degree On Oil Shale Anisotropy and Damage Deterioration Characteristics

Experimental research on anisotropic properties of shale

Atomistic study on thermo-mechanical behavior and structural anisotropy of montmorillonite under triaxial tension and compression

4D in situ synchrotron X-ray tomographic microscopy and laser-based heating study of oil shale pyrolysis

Experimental Study on Mechanical, Brittleness, and Fracture Behavior of Deep Shales Subjected to Fracturing Fluid-Shale Interactions at Reservoir Temperature and In-Situ Stress Conditions