Research on the Mechanical Properties and Anisotropy Evolution of Uniaxial Compression of Oil Shale Under Real-Time High-Temperature Steam
Lei Wang,Guoying Wang,Dong Yang,Jing Zhao,Zhiqin Kang,Qingyou Zeng,Yangsheng Zhao
DOI: https://doi.org/10.1007/s00603-024-04246-1
IF: 6.518
2024-11-13
Rock Mechanics and Rock Engineering
Abstract:The process of in-situ oil shale extraction via convection heating is accompanied by complex solid–fluid-thermal-mass transfer multi-field coupling effects. As the fluid temperature increases, thermal cracking and pyrolysis occur within the oil shale, forming a highly permeable and porous structure, resulting in the oil shale being subjected to complex stress field changes. This paper, set against the background of the in-situ oil shale extraction process using steam injection, conducts uniaxial compression tests on oil shale under different bedding directions under the real-time action of high-temperature steam. Combined with micro-CT, XRD and XPS analysis of oil shale, the characteristics of anisotropic evolution of compressive strength of oil shale under the real-time action of high-temperature steam and the internal mechanisms occurring are clarified. As the steam temperature increases, the compressive strength and elastic modulus of oil shale in different bedding directions show a trend of decreasing and then increasing, reaching their lowest values at a steam temperature of 400 °C. The rate of change in compressive strength of oil shale perpendicular and parallel to the bedding direction differs significantly at different pyrolysis stages. When the steam temperature exceeds 400 °C, the rate of increase in compressive strength of oil shale in the vertical bedding direction is significantly higher than in the parallel bedding direction. At high temperatures, the fracturing of oil shale is primarily along the bedding planes, while the development of interlayer fractures is relatively slow, resulting in higher strength of oil shale in the vertical bedding direction. The failure characteristics of oil shale perpendicular to the bedding direction transition from brittle shear fracturing to semi-brittle shear fracturing and then to plastic deformation, eventually returning to semi-brittle shear fracturing. In contrast, the failure characteristics of oil shale parallel to the bedding direction transition from brittle shear fracturing through semi-brittle shear fracturing to plastic deformation. During pyrolysis process, the content of clay minerals inside the oil shale does not change significantly, but the change in non-clay minerals is most pronounced. When the temperature exceeds 400 °C, the diffraction-peak intensity of pyrite suddenly decreases or even disappears, the diffraction-peak intensity of kaolinite gradually decreases, and the content changes of elements such as C, O, Al, Si are also more noticeable. The transformation of internal mineral composition in oil shale (e.g., the conversion of kaolinite to metakaolinite) is the fundamental reason for the strength increase of oil shale at temperatures above 400 °C.
geosciences, multidisciplinary,engineering, geological