Abstract:The process of in-situ oil shale extraction via convection heating is accompanied by complex solid–fluid-thermal-mass transfer multi-field coupling effects. As the fluid temperature increases, thermal cracking and pyrolysis occur within the oil shale, forming a highly permeable and porous structure, resulting in the oil shale being subjected to complex stress field changes. This paper, set against the background of the in-situ oil shale extraction process using steam injection, conducts uniaxial compression tests on oil shale under different bedding directions under the real-time action of high-temperature steam. Combined with micro-CT, XRD and XPS analysis of oil shale, the characteristics of anisotropic evolution of compressive strength of oil shale under the real-time action of high-temperature steam and the internal mechanisms occurring are clarified. As the steam temperature increases, the compressive strength and elastic modulus of oil shale in different bedding directions show a trend of decreasing and then increasing, reaching their lowest values at a steam temperature of 400 °C. The rate of change in compressive strength of oil shale perpendicular and parallel to the bedding direction differs significantly at different pyrolysis stages. When the steam temperature exceeds 400 °C, the rate of increase in compressive strength of oil shale in the vertical bedding direction is significantly higher than in the parallel bedding direction. At high temperatures, the fracturing of oil shale is primarily along the bedding planes, while the development of interlayer fractures is relatively slow, resulting in higher strength of oil shale in the vertical bedding direction. The failure characteristics of oil shale perpendicular to the bedding direction transition from brittle shear fracturing to semi-brittle shear fracturing and then to plastic deformation, eventually returning to semi-brittle shear fracturing. In contrast, the failure characteristics of oil shale parallel to the bedding direction transition from brittle shear fracturing through semi-brittle shear fracturing to plastic deformation. During pyrolysis process, the content of clay minerals inside the oil shale does not change significantly, but the change in non-clay minerals is most pronounced. When the temperature exceeds 400 °C, the diffraction-peak intensity of pyrite suddenly decreases or even disappears, the diffraction-peak intensity of kaolinite gradually decreases, and the content changes of elements such as C, O, Al, Si are also more noticeable. The transformation of internal mineral composition in oil shale (e.g., the conversion of kaolinite to metakaolinite) is the fundamental reason for the strength increase of oil shale at temperatures above 400 °C.

Influence of Pyrolysis Degree On Oil Shale Anisotropy and Damage Deterioration Characteristics

Research on the Mechanical Properties and Anisotropy Evolution of Uniaxial Compression of Oil Shale Under Real-Time High-Temperature Steam

Influence of Temperature and Bedding Planes on the Mode I Fracture Toughness and Fracture Energy of Oil Shale Under Real-Time High-Temperature Conditions

Evolution of Pore and Fracture Structure of Oil Shale under High Temperature and High Pressure

Microstructural Imaging and Characterization of Oil Shale Before and after Pyrolysis

Effects of Heating Rate, Particle Size, Aerobic Atmosphere, and Flow Rate on the Pyrolysis Characteristics of Huadian Oil Shale

Experimental Investigation of the Anisotropic Evolution of Tensile Strength of Oil Shale Under Real-Time High-Temperature Conditions

Experimental Investigation of Anisotropic Thermal Deformation of Oil Shale Under High Temperature and Triaxial Stress Based on Mineral and Micro-fracture Characteristics

An Investigation on the Pyrolysis of Low-Maturity Organic Shale by Different High Temperature Fluids Heating

Pyrolysis Characteristics and Effect on Pore Structure of Jimsar Oil Shale Based on TG-FTIR-MS Analysis

Study on the Change of Physical Properties of Organic-rich Shale after Heat Treatment

Investigation on the Fracture-Pore Evolution and Percolation Characteristics of Oil Shale under Different Temperatures

Numerical Investigation of the in Situ Oil Shale Pyrolysis Process by Superheated Steam Considering the Anisotropy of the Thermal, Hydraulic, and Mechanical Characteristics of Oil Shale

Experimental investigation on pyrolysis products and pore structure characteristics of organic-rich shale heated by supercritical carbon dioxide

Pyrolysis of Oil Shale Mixed with Low-Density Polyethylene

Investigation on damage evolution law of anisotropic shale at different hydraulic pressures

Effects of composition and pore evolution on thermophysical properties of Huadian oil shale in retorting and oxidizing pyrolysis

The Effect of Thermal Maturity on the Pore Structure Heterogeneity of Xiamaling Shale by Multifractal Analysis Theory: A Case from Pyrolysis Simulation Experiments

Quantifying Pore Structure Heterogeneity of Shale Samples after Solvent Extraction Following Anhydrous and Hydrous Pyrolysis

Effect of final pyrolysis temperature on the composition and structure of shale oil: Synergistic use of multiple analysis and testing methods

Study on the pore evolution of Xinjiang oil shale under pyrolysis based on joint characterization of LNTA and MIP