Abstract:To elucidate the mechanisms underlying the alteration of shale pore fractures by high-temperature supercritical carbon dioxide (ScCO 2 ), this study employed medium–low maturity shale samples from a specific region as research subjects. The samples were subjected to high-temperature ScCO 2 reactions in a corrosion-resistant high-pressure reaction vessel at various temperatures. A suite of analytical techniques, including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), ImageJ image processing software, N 2 and CO 2 adsorption experiments, thermal gravimetric-differential thermal analysis (TG-DTG) of CO 2 pyrolyzed shale oil, and gas chromatography (GC) analysis, were utilized to investigate and analyze the microstructural changes in the shale samples before and after ScCO 2 treatment. The results reveal a subtle increase in the content of clay minerals and quartz, accompanied by a decrease in the content of carbonates, potassium feldspar, and calcite. These mineral transformations, encompassing dissolution, precipitation, and swelling processes, exert a substantial impact on the shale surface microstructure and modify the internal pore structure. Consequently, a shift in the mechanical properties of the rock is observed, which bears significance for its fracturing behavior. The experimental results reveal a steady growth in fracture area following high-temperature ScCO 2 treatment. Importantly, the extent of initial fracture development plays a crucial role in determining the efficacy of hydraulic fracturing, indicating a positive correlation. Moreover, the connection between fracture area and temperature exhibits a clear trend marked by an initial rise, a subsequent decline, and finally, a resurgence. In particular, the thermal fracturing threshold temperature for the shale samples was found to be around 400 °C. From the analysis, it can be inferred that ScCO 2 , when subjected to an elevated temperature range of 100-200°C, exhibits mutual interactions with the shale. This results in effective extraction of organic matter and dissolution of mineral constituents within the shale matrix. Consequently, this treatment process leads to a significant reduction in the number of micropores (pore sizes less than 2 nm), while the quantities of mesopores (pore sizes between 2 and 50 nm) and macropores (pore sizes greater than 50 nm) display a noticeable increase. Upon exposure to a temperature range of 200-300°C, a remarkable affinity of the shale for CO 2 adsorption becomes evident. The adsorption process contributes to the expansion of the matrix material and deposition of minerals, effectively filling the pore spaces. As a result, the contraction of mesopores and macropores is mitigated, with the predominant change being an increase in the number of micropores. When temperatures reach 300-500°C, the intensified heat initiates thermal decomposition of the kerogen, culminating in the release of pore spaces. This phenomenon prompts an increase in the number of micropores and mesopores, thereby augmenting the pore volume and specific surface area of the shale.

Experimental investigation on pyrolysis products and pore structure characteristics of organic-rich shale heated by supercritical carbon dioxide

An Investigation on the Pyrolysis of Low-Maturity Organic Shale by Different High Temperature Fluids Heating

Shale Microstructure Characteristics under the Action of Supercritical Carbon Dioxide (Sc-CO2)

Release Mechanism of Volatile Products from Oil Shale Pressure-Controlled Pyrolysis Induced by Supercritical Carbon Dioxide

Mechanism of pore expansion and fracturing effect of high-temperature ScCO 2 on shale

Microstructural Imaging and Characterization of Oil Shale Before and after Pyrolysis

Effect of Reservoir Properties on the Performance of Oil Shale In-Situ Pyrolysis Using Supercritical CO2 in Fractured Reservoir

Pyrolysis Characteristics and Effect on Pore Structure of Jimsar Oil Shale Based on TG-FTIR-MS Analysis

Study on the Influence of Supercritical CO 2 with High Temperature and Pressure on Pore-Throat Structure and Minerals of Shale

Experimental study on pore structure evolution of thermally treated shales: implications for CO2 storage in underground thermally treated shale horizons

Pyrolysis characteristics and evolution of the organics in Nong'an oil shale lump during sub-critical water extraction

Effect of supercritical CO2 exposure on the high-pressure CO2 adsorption performance of shales

Study on the pore evolution of Xinjiang oil shale under pyrolysis based on joint characterization of LNTA and MIP

Study on pyrolysis of ultra-high-quality oil shale: product characterization and a utilization process

Study on the Pore and Fracture Connectivity Characteristics of Oil Shale Pyrolyzed by Superheated Steam

The mechanism of superheated steam affecting the quality of in-situ pyrolysates of oil shale kerogen: Part A-saturation of pyrolytic organics

High-Temperature-Induced Pore System Evolution of Immature Shale with Different Total Organic Carbon Contents

Extraction of kerogen from oil shale with supercritical carbon dioxide: Molecular dynamics simulations

Study on pyrolysis characteristics of Gonghe oil shale using Py-GC/MS under different atmospheres

Effect of final pyrolysis temperature on the composition and structure of shale oil: Synergistic use of multiple analysis and testing methods