Abstract:Conduction heating and convection heating are the two main methods of in-situ oil shale extraction. The efficiency of heat injection and transfer, oil and gas transportation and production during in-situ oil shale extraction is directly controlled by shale structure and permeability. In this paper, pyrolysis tests of conduction-heated and convection-heated oil shale were carried out, micro-CT scans of the pyrolyzed oil shale were performed, and systematic comparisons of the differences in the pore structure of oil shale under the two heating modes were carried out, and the seepage-heat transfer simulation of oil shale at the fine-scale was realized by interfacing Avizo with the multi-field coupled finite element software Comsol. The results of the study show: the original oil shale sample produces a large number of irregular pores at different scales after conduction and convection heating, resulting in a significant increase in the representative elementary volume, which are 3.5 times higher than the original state. After conduction heating and convection heating, the porosity of oil shale increases by 2.96 and 3.15 times compared to the original state, respectively. The pore size distribution of oil shale in the original state ranges from 5 μm to 320 μm, which dramatically expands to 5–1400 μm when heated by conduction and convection, demonstrating that small-scale pores connect to form large-scale pores. In the original state, the percentage of oil shale pore shape factor of 0.0625 was as high as 29 %, the percentage of oil shale pore shape factor in the range of 0.005–0.032 was significantly increased by conductive heating treatment, and the percentage of pore shape factor in the range of 0.005–0.02 was slightly increased by the convective heating effect at the same temperature. The permeability and maximum heat transfer rate of oil shale after convective heating increased by 5.51 and 6.17 times, respectively, compared with conduction heating, and the pore-fracture connectivity of oil shale after convective heating was greatly improved compared with that of conduction heating, which reduced the emergence of dead-end fractures and isolated fractures, and improved the seepage capacity and heat transfer capacity of oil shale.

Effect of Reservoir Properties on the Performance of Oil Shale In-Situ Pyrolysis Using Supercritical CO2 in Fractured Reservoir

Experimental investigation on pyrolysis products and pore structure characteristics of organic-rich shale heated by supercritical carbon dioxide

Numerical Investigation of the in Situ Oil Shale Pyrolysis Process by Superheated Steam Considering the Anisotropy of the Thermal, Hydraulic, and Mechanical Characteristics of Oil Shale

Influence of Supercritical CO 2 Fracturing Fluid on the Permeability of Shale Reservoir and Mechanism Analysis

Gas flow characteristics in shale fractures after supercritical CO2 soaking

Study on Geological Deformation of Supercritical CO2 Sequestration in Oil Shale after In Situ Pyrolysis

Experimental Study on the Impact of Supercritical CO2 Soak Pre-Treatment on Re-Fracturing of Shale Oil Reservoirs

Effect of pyrolysis on oil shale using superheated steam: A case study on the Fushun oil shale, China

Study on the Influence of Supercritical CO 2 with High Temperature and Pressure on Pore-Throat Structure and Minerals of Shale

Characterization of fracture and percolation processes in oil shale under conduction and convection heating modes based on micro-CT technology

Numerical Simulation of the Fracture Propagation Mechanism during Supercritical Carbon Dioxide Fracturing in Shale Reservoirs

Investigation on the Fracture-Pore Evolution and Percolation Characteristics of Oil Shale under Different Temperatures

Release Mechanism of Volatile Products from Oil Shale Pressure-Controlled Pyrolysis Induced by Supercritical Carbon Dioxide

Simulation of Supercritical Carbon Dioxide Fracturing in Shale Gas Reservoir

Numerical Investigation of the Heat and Mass Transfer during the In Situ Pyrolysis Process of Oil-Rich Coal

Shale Microstructure Characteristics under the Action of Supercritical Carbon Dioxide (Sc-CO2)

Exploring pore-scale production characteristics of oil shale after CO2 huff 'n' puff in fractured shale with varied permeability

Experimental Study on the Effect of Supercritical CO2 on Mechanical Properties and Fracture Characteristics of Longmaxi Shale

Study on the Pore and Fracture Connectivity Characteristics of Oil Shale Pyrolyzed by Superheated Steam

Thermomechanical coupling seepage in fractured shale under stimulation of supercritical carbon dioxide

Sensitivity Analysis of Oil and Gas Production in the In Situ Pyrolysis of Oil Shale