Abstract:Summary Fracturing is the necessary means of tight oil development, and the most common fracturing fluid is slickwater. However, the Loess Plateau of the Ordos Basin in China is seriously short of water resources. Therefore, the tight oil development in this area by hydraulic fracturing is extremely costly and environmentally unfriendly. In this paper, a new method using supercritical carbon dioxide (CO2) (ScCO2) as the prefracturing energized fluid is applied in hydraulic fracturing. This method can give full play to the dual advantages of ScCO2 characteristics and mixed-water fracturing technology while saving water resources at the same time. On the other hand, this method can reduce reservoir damage, change rock microstructure, and significantly increase oil production, which is a development method with broad application potential. In this work, the main mechanism, the system-energy enhancement, and flowback efficiency of ScCO2 as the prefracturing energized fluid were investigated. First, the microscopic mechanism of ScCO2 was studied, and the effects of ScCO2 on pores and rock minerals were analyzed by nuclear-magnetic-resonance (NMR) test, X-ray-diffraction (XRD) analysis, and scanning-electron-microscope (SEM) experiments. Second, the high-pressure chamber-reaction experiment was conducted to study the interaction mechanism between ScCO2 and live oil under formation conditions, and quantitively describe the change of high-pressure physical properties of live oil after ScCO2 injection. Then, the numerical-simulation method was applied to analyze the distribution and existence state of ScCO2, as well as the changes of live-oil density, viscosity, and composition in different stages during the full-cycle fracturing process. Finally, four injection modes of ScCO2-injection core-laboratory experiments were designed to compare the performance of ScCO2 and slickwater in terms of energy enhancement and flowback efficiency, then optimize the optimal CO2-injection mode and the optimal injection amount of CO2 slug. The results show that ScCO2 can dissolve calcite and clay minerals (illite and chlorite) to generate pores with sizes in the range of 0.1 to 10 μm, which is the main reason for the porosity and permeability increases. Besides, the generated secondary clay minerals and dispersion of previously cemented rock particles will block the pores. ScCO2 injection increases the saturation pressure, expansion coefficient, volume coefficient, density, and compressibility of crude oil, which are the main mechanisms of energy increase and oil-production enhancement. After analyzing the four different injection-mode tests, the optimal one is to first inject CO2 and then inject slickwater. The CO2 slug has the optimal value, which is 0.5 pore volume (PV) in this paper. In this paper, the main mechanisms of using ScCO2 as the prefracturing energized fluid are illuminated. Experimental studies have proved the pressure increase, production enhancement, and flowback potential of CO2 prefracturing. The application of this method is of great significance to the protection of water resources and the improvement of the fracturing effect.

Influence of Supercritical CO 2 Fracturing Fluid on the Permeability of Shale Reservoir and Mechanism Analysis

Analysis of Fracturing Expansion Law of Shale Reservoir by Supercritical CO2 Fracturing and Mechanism Revealing

Experimental Study on the Effect of Supercritical CO2 on Mechanical Properties and Fracture Characteristics of Longmaxi Shale

Shale permeability and microstructural alternation during CO2 pre-fracturing: A mechanistic study

Numerical Simulation of the Fracture Propagation Mechanism during Supercritical Carbon Dioxide Fracturing in Shale Reservoirs

Gas flow characteristics in shale fractures after supercritical CO2 soaking

Simulation of Supercritical Carbon Dioxide Fracturing in Shale Gas Reservoir

Experimental Study on the Impact of Supercritical CO2 Soak Pre-Treatment on Re-Fracturing of Shale Oil Reservoirs

Thermomechanical coupling seepage in fractured shale under stimulation of supercritical carbon dioxide

Supercritical CO2-Shale interaction induced natural fracture closure: Implications for scCO2 hydraulic fracturing in shales

Study on the Influence of Supercritical CO 2 with High Temperature and Pressure on Pore-Throat Structure and Minerals of Shale

Further Investigation of CO2 Quasi-Dry Fracturing in Shale Reservoirs—An Experimental Study

The permeability of shale exposed to supercritical carbon dioxide

Experimental Investigation on Enhanced-Oil-Recovery Mechanisms of Using Supercritical Carbon Dioxide as Prefracturing Energized Fluid in Tight Oil Reservoir

Chemical-Mechanical Coupling Effects on the Permeability of Shale Subjected to Supercritical CO 2-Water Exposure

Study on the Alteration of Pore Parameters of Shale with Different Natural Fractures under Supercritical Carbon Dioxide Seepage

The Permeability Alternation of Shale Fractures due to Sc-CO2 Soaking: Implications for Sc-CO2 Fracturing and Deep CO2 Sequestration in Shale Reservoirs

A Review of Supercritical CO2 Fracturing Technology in Shale Gas Reservoirs

Short-term interactions between Longmaxi shale and carbon dioxide-based fracturing fluids

Pore changes of slickwater-containing shale under supercritical CO2 treatment

Formulation and performance evaluation of polymer-thickened supercritical CO2 fracturing fluid