Abstract:The co-pyrolysis of biomass and fossil fuels has been the subject of studies on sustainable energy. Co-feeding oil shale with woody biomass can contribute to a transition into carbon neutrality. The present study analysed the thermal decomposition behaviour of oil shale and biomass blends (0:1, 3:7, 1:1, 7:3, 9:1, and 1:0) through thermogravimetric analysis (TGA) at 80–630 °C with a heating rate of 10 °C/min in CO2 and N2 atmospheres. A comparison of theoretical and experimental residual mass yields of oil shale–biomass mixtures indicated no significant interactions between the fuels. The blends contributed to a decrease of up to 34.4 wt% in solid residues compared to individual pyrolysis of oil shale, and the TGA curves were shifted from up to 10 °C to a lower temperature when the biomass ratio increased. The use of a CO2 atmosphere resulted in the production of solid residues, comparable to the one obtained with the N2 atmosphere. CO2 atmosphere can be used in oil shale–biomass co-pyrolysis, without affecting the decomposition process or increasing the yield of residues. A kinetic model method is proposed based on TGA data at 10, 20, and 30 °C/min. The apparent activation energies for a temperature range of 200–520 °C were in the order of 139, 155, 164, 197, 154, and 167 kJ/mol for oil shale–biomass 0:1, 3:7, 1:1, 7:3, 9:1, and 1:0 blends, respectively. From the isoconversional kinetic analysis, a two-stage pyrolysis was observed, which separated biomass and oil shale pyrolysis. A simulation of biomass and oil shale co-pyrolysis was conducted in Aspen Plus® using TGA-derived kinetic data. The model prediction resulted in a close match with the experimental thermogravimetric data with absolute errors from 1.75 to 3.78%, which highlights the relevance of TGA analysis in simulating co-pyrolysis processes.

Pyrolysis of Oil Shale Mixed with Low-Density Polyethylene

Investigation on the characteristics and interaction of co-pyrolysis of oil shale and peanut shell

An Investigation on the Pyrolysis of Low-Maturity Organic Shale by Different High Temperature Fluids Heating

Enhanced pyrolysis of Huadian oil shale at high temperature in the presence of water and air atmosphere

Co-pyrolysis of pinewood and HDPE: pyrolysis characteristics and kinetic behaviors study

Pyrolysis behavior of low-density polyethylene over HZSM-5 via rapid infrared heating

Microwave catalytic co-pyrolysis of low-density polyethylene and spent bleaching clay for monocyclic aromatic hydrocarbons

Effect of final pyrolysis temperature on the composition and structure of shale oil: Synergistic use of multiple analysis and testing methods

Effects of Heating Rate, Particle Size, Aerobic Atmosphere, and Flow Rate on the Pyrolysis Characteristics of Huadian Oil Shale

Synergistic Effects on Char and Oil Produced by the Co-Pyrolysis of Pine Wood, Polyethylene and Polyvinyl Chloride

Co-pyrolysis of different torrefied Chinese herb residues and low-density polyethylene: Kinetic and products distribution

Efficient Pyrolysis of Low-Density Polyethylene for Regulatable Oil and Gas Products by ZSM-5, HY and MCM-41 Catalysts

Insight into low-temperature co-pyrolysis of Qinglongshan lean coal with organic matter in Huadian oil shale

Studies of the Co-Pyrolysis of Oil Shale and Wheat Straw

Study on Pyrolysis of Shale Gas Oil-Based Drilling Cuttings: Kinetics, Process Parameters, and Product Yield

Co-Pyrolysis of Estonian Oil Shale with Polymer Wastes

Study on pyrolysis of ultra-high-quality oil shale: product characterization and a utilization process

Co-Pyrolysis of Woody Biomass and Oil Shale in a Batch Reactor in CO2, CO2-H2O, and Ar Atmospheres

Co-pyrolysis of Oil Sludge with Hydrogen-Rich Plastics in a Vertical Stirring Reactor: Kinetic Analysis, Emissions, and Products

Co-Pyrolysis of Woody Biomass and Oil Shale—A Kinetics and Modelling Study

Investigation of kinetics, reaction mechanisms, thermodynamics, and synergetic effects in co-pyrolysis of wood sawdust and linear low-density polyethylene using the thermogravimetric approach