Study on Pyrolysis of Shale Gas Oil-Based Drilling Cuttings: Kinetics, Process Parameters, and Product Yield

Pu Liu,Quanlin Xiao,Ning Dai,Zhongbin Liu,Chenlong Wang

DOI: https://doi.org/10.1021/acsomega.2c07379

IF: 4.1

2023-04-04

ACS Omega

Abstract:The main reaction range (350-550 °C) of oil-based drilling cutting (OBDC) pyrolysis was studied by a thermogravimetric analyzer and a vacuum tube furnace. The average activation energies calculated by four model-free methods were 185.5 kJ/mol (FM), 184.16 kJ/mol (FWO), 166.17 kJ/mol (KAS), and 176.03 kJ/mol (Starink). The reaction mechanism was predicted by the Criado (Z-master plot) method. It is found that a high heating rate is helpful to predict the reaction mechanism, but it cannot be described by a single reaction model. Under the conditions of target temperature higher than 350 °C, residence time higher than 50 min, laying thickness less than 20 mm, and heating rate lower than 15 °C, the residual oil content is lower than 0.3% and the recovery rate of mineral oil is higher than 98.43%. Solid phase products accounted for more than 70%, reached the maximum 17.04% at 450 °C, and then decreased to 15.87% at 500 °C. Aromatic hydrocarbons, as coking precursors, are transformed from a low ring to a high ring. Recycled mineral oil can reconfigure oil-based mud (OBM). The research results can provide a theoretical basis for process optimization.