Abstract:Abstract The non-uniform disturbance in the circumferential direction is the main cause for the occurrence of rotating stall in turbomachinery. In order to study the effect of tip clearance leakage flow on rotating stall, the mixed-flow pump models with different tip clearances are numerically simulated, and then the energy performance curves and internal flow structures are obtained and compared. The results show that the computed pump efficiency and the internal flow field of the pump from numerical simulation are in good agreement with the experimental results. A saddle region appears in the energy performance curves of the three tip clearances, and with decrease in tip clearance, the head and efficiency of the mixed-flow pump increase and the critical stall point shifts, and the stable operating range of the mixed-flow pump decreases, which indicates that the mixed-flow pump stalls easily for smaller tip clearance. Under the deep stall condition, the influence of the leakage flow in the end wall area increases gradually with decrease in clearance. For small clearance, the leakage flow moves away from the suction surface to some distance to form a number of leakage vortex strips with the mainstream flow and flows over the leading edge of the next blade and then flows downstream into different flow passages, generating backflow and secondary flow separation at the blade inlet, which seriously damages the spatial structure of the inlet flow. This results in the earlier occurrence of stall. With increase in clearance, the leakage vortex develops along the radial direction towards the middle of the flow channel and large flow separation occurs in the downstream channel, which induces deep stall. For 0.8mm clearance, the whole impeller outlet passage is almost blocked by the backflow of the guide vane inlet, and a deep stall is induced.

Influence of rotating speed on tip leakage vortex in a mixed flow pump as turbine at pump mode

Tip Clearance on Pressure Fluctuation Intensity and Vortex Characteristic of a Mixed Flow Pump As Turbine at Pump Mode

Theoretical Prediction Model of Tip Leakage Vortex in a Mixed Flow Pump With Tip Clearance

Investigation of tip leakage vortex characteristics around tip clearance in a mixed flow pump

Effect of tip clearance flow on pressure oscillation and vortex patterns of a high-speed centrifugal pump

Effect of the tip clearance on tip leakage vortex and pressure fluctuation characteristics in a helico-axial flow multiphase pump

Energy Performance and Flow Patterns of a Mixed-Flow Pump with Different Tip Clearance Sizes

Influence of tip leakage flow and inlet distortion flow on a mixed-flow pump with different tip clearances within the stall condition

Spatial–Temporal Evolution of Tip Leakage Vortex in a Mixed-Flow Pump With Tip Clearance

Analysis of Tip Clearance Effect on the Transportation Characteristics of a Multiphase Rotodynamic Pump Based on the Non-Uniform Bubble Model

Experimental and Numerical Investigation on the Tip Leakage Vortex Cavitation in an Axial Flow Pump with Different Tip Clearances

Tip Leakage Vortex Trajectory and Dynamics in a Multiphase Pump at Off-Design Condition

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

Symmetrical and Unsymmetrical Tip Clearances on Cavitation Performance and Radial Force of a Mixed Flow Pump As Turbine at Pump Mode

Experimental investigation on spatial-temporal evolution of tip leakage cavitation in a mixed flow pump with tip clearance

Research on tip leakage vortex characteristics of axial-flow circulating pumps under unpowered driven conditions

Influence of T-shape Tip Clearance on Performance of a Mixed-Flow Pump

Effect of Tip Clearance on Rotating Stall in a Mixed-Flow Pump

Velocity Characteristics in a Multiphase Pump under Different Tip Clearances

Study on the trajectory of tip leakage vortex and energy characteristics of mixed-flow pump under cavitation conditions

Effect of Rotational Speed on Performance of Mixed Flow Pump as Turbine