Abstract:The clearance leakage flow of liquid-ring pump has complex spatiotemporal distribution characteristics, and it has severe negative impact on its performance. In order to suppress the axial blade tip leakage flow of liquid-ring pump, the spatiotemporal distribution characteristics of leakage flow was analyzed in detail by numerical simulation method. The composite tip of winglet and squealer was introduced to the liquid-ring pump, and its suppression mechanism was analyzed. The RNG k-ε turbulence model and VOF multiphase flow model were selected to simulate transient flow in liquid-ring pump. The results show that the leakage flow in the suction zone gradually decreases from hub to rim, and the leakage flow intensity gradually increases along the rotation direction of the impeller. The gas leakage velocity of compression zone is the highest, and the leakage flow intensity gradually increases along the rotation direction of the impeller. In the exhaust zone, the reverse leakage flow forms near the hub, which flows from the clearance suction side to the pressure side, and the leakage flow intensity gradually decreases from the hub to the rim. Near the rim, the leakage flow direction changes, flowing from pressure side to suction side. In the transition zone, as the impeller flow passage approaching suction zone gradually, the pressure decreases continuously. The pressure on the clearance suction side is greater than that of the pressure side, and the reverse leakage flow forms near the hub. The composite tip blade of winglet and squealer not only lengthens the clearance channel but also blocks the clearance by the pressure side squealer corner vortex and the squealer vortex, thus the leakage flow was effectively suppressed. To some extend the composite tip can suppress the leakage flow, the vacuum values are improved by 3.5%, 3.9%, and 5.3% under different conditions respectively.

Research on tip leakage vortex characteristics of axial-flow circulating pumps under unpowered driven conditions

Experimental and Numerical Investigation on the Tip Leakage Vortex Cavitation in an Axial Flow Pump with Different Tip Clearances

Effect of tip clearance flow on pressure oscillation and vortex patterns of a high-speed centrifugal pump

Research on the Influence of Impeller Tip Clearance on the Internal Flow Loss of Axial Circulating Pump Under Unpowered Driven Condition

Study on the trajectory of tip leakage vortex and energy characteristics of mixed-flow pump under cavitation conditions

Experimental Investigation of the Transient Patterns and Pressure Evolution of Tip Leakage Vortex and Induced-Vortices Cavitation in an Axial Flow Pump

Energy dissipation mechanism of tip-leakage cavitation in mixed-flow pump blades

Circumferential propagation of tip leakage flow unsteadiness for a low-speed axial compressor

Study on the Tip Leakage Loss Mechanism of a Compressor Cascade Using the Enhanced Delay Detached Eddy Simulation Method

Investigation of tip leakage vortex characteristics around tip clearance in a mixed flow pump

A Study on the Mechanism of Tip Leakage Flow Unsteadiness in an Isolated Compressor Rotor

Flow Mechanism And Loss Analysis Of Tip Leakage Flow With Delayed Detached Eddy Simulation

The investigation on the flow characteristics during the continuous development of the tip leakage vortex cavitation in an axial pump-jet propulsion

Experimental investigation on spatial-temporal evolution of tip leakage cavitation in a mixed flow pump with tip clearance

Unsteady effects of vortex interaction on tip leakage vortex breakdown and its loss mechanism

Research on blade tip clearance cavitation and turbulent kinetic energy characteristics of axial flow pump based on the partially-averaged Navier-Stokes model

Unsteady Simulation of the Internal Flow in a Tubular Pump Considering Tip-Leakage Flow

Effect of the tip clearance on tip leakage vortex and pressure fluctuation characteristics in a helico-axial flow multiphase pump

The spatiotemporal distribution characteristics analysis and suppression of the axial tip clearance leakage flow for the liquid-ring vacuum pump

Blade Aerodynamic Force and Tip Region Vortex Spatial-temporal Evolution Study of a Compressor Cascade

Quantitative Analysis of Energy Loss and Vibration Performance in a Circulating Axial Pump