Abstract:In order to solve the blockage effect and energy dissipation phenomenon caused by cavitation in the low-pressure vortex core region, this paper analyzes the spatial evolution of vorticity intensity and turbulent kinetic energy intensity under different cavitation conditions based on the Wray–Agarwal (WA) model. First, the tip leakage flow characteristics are studied, the evolution of vorticity and vorticity intensity is analyzed, then the distribution of turbulent kinetic energy distribution in the blade tip region is studied, and finally, the vorticity transport characteristics of the tip region are analyzed. It is found that the tip leakage rate is less affected by the vortex cavitation of the tip leakage, and there is a strong interaction between the leakage flow at the tip leading edge and the trailing edge, and the separation vortices and low-speed regions formed in the end-wall region cause blockage of the flow passage. Low pressure causes cavitation to cover most regions of the suction surface, inhibiting the formation and development of the tip leakage vortices. The distribution range of high turbulent kinetic energy region is almost the same as that of high-vorticity region, and there is a positive correlation between the two intensities. Severe cavitation causes the high turbulent kinetic energy region at the outlet of the flow passage to develop in the radial and axial directions of the impeller, which increases the turbulent dissipation and energy loss. The change of vorticity transport intensity caused by cavitation is mainly reflected in the expansion contraction term, and the Coriolis force term plays a dominant role in the vorticity transport process. This paper provides a reference for further improving the performance of mixed-flow pumps.

Study on the trajectory of tip leakage vortex and energy characteristics of mixed-flow pump under cavitation conditions

Energy dissipation mechanism of tip-leakage cavitation in mixed-flow pump blades

Study on cavitating vortex rope characteristics of reversible pump-turbine under part load turbine condition

Vortex dynamics characteristics in the tip region based on Wray–Agarwal model

Experimental investigation on spatial-temporal evolution of tip leakage cavitation in a mixed flow pump with tip clearance

Experimental Investigation of the Transient Patterns and Pressure Evolution of Tip Leakage Vortex and Induced-Vortices Cavitation in an Axial Flow Pump

The investigation on the flow characteristics during the continuous development of the tip leakage vortex cavitation in an axial pump-jet propulsion

Experimental and Numerical Investigation on the Tip Leakage Vortex Cavitation in an Axial Flow Pump with Different Tip Clearances

Study on the Influence of Tip Clearance on Cavitation Performance and Entropy Production of an Axial Flow Pump

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

Tip Leakage Vortex Trajectory and Dynamics in a Multiphase Pump at Off-Design Condition

Numerical analysis of vortex and cavitation dynamics of an axial-flow pump

Research on Cavitation Wake Vortex Structures Near the Impeller Tip of a Water-Jet Pump

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

Research on blade tip clearance cavitation and turbulent kinetic energy characteristics of axial flow pump based on the partially-averaged Navier-Stokes model

Influence of cavitation on vortical structures and energy loss in a waterjet pump

Quantitative Analysis of Energy Loss and Vibration Performance in a Circulating Axial Pump

Numerical and experimental study of tip leakage vortex structures and dynamics in a mixed-flow waterjet pump

Spatial-temporal evolution of tip leakage cavitation with double-hump in a mixed flow pump with tip clearance

Unsteady Simulation of the Internal Flow in a Tubular Pump Considering Tip-Leakage Flow

Experimental on spatial-temporal evolution characteristics of the blade tip cavitation in a mixed flow waterjet pump