Abstract:Further improvements of flow in tip clearance demand a better understanding of its complex structure and this would not be possible if we are not able to provide an interpretative or a more realistic presentation of its main effects, i.e., viscous dissipation and mixing. To do so and to gain further insights into the details and distribution of viscous dissipation, a commercial N-S solver has been employed for simulation and investigation of the unsteady flow field inside the tip clearance of a turbine rotor in first stage. The main objective of this paper is to introduce the direct implementation of dissipation function for viscous dissipation assessment in tip leakage flow. This idea seems to be the simplest and at the same time, the most straightforward approach to simulate and calculate the viscous dissipation caused by viscous effects. It is shown that the dissipation function can be employed as a strong and convenient tool in direct identification and assessment of regions of high viscous dissipation. It has been found that in tip leakage flow, regions of high viscous effects are located near casing rather than blade tip. Near casing, leakage flow creates a source point in pressure side and a sink point in suction side on rotor blade tip projection on the casing. It is shown that the time-averaged viscous dissipation in tip leakage flow is dissimilar for rotor blades. This result, which is caused by flow unsteadiness, is a helpful hint that can be taken by blade designers to design non-uniform rotor blades, that is, to design blades with different geometries and aerodynamic loads, both circumferentially and radially, to minimize the viscous dissipation. The casing passage vortex, the end wall boundary layers, and the wakes from the upstream stator significantly enhance the unsteadiness of the flow to the tip region of rotor blades. Results indicate that there exists a strong interaction between leakage flow and annulus-wall boundary layer.

Energy dissipation mechanism of tip-leakage cavitation in mixed-flow pump blades

Study on the trajectory of tip leakage vortex and energy characteristics of mixed-flow pump under cavitation conditions

Vortex dynamics characteristics in the tip region based on Wray–Agarwal model

Influence of cavitation on vortical structures and energy loss in a waterjet pump

Study on the Influence of Tip Clearance on Cavitation Performance and Entropy Production of an Axial Flow Pump

Leakage vortices and energy characteristics of semi-open sewage pump with various blade tip alterations

Experimental on spatial-temporal evolution characteristics of the blade tip cavitation in a mixed flow waterjet pump

Enstrophy dissipation of the tip leakage vortex in a multiphase pump

Pressure Fluctuation and Flow Pattern of A Mixed-Flow Pump with Different Blade Tip Clearances under Cavitation Condition

Experimental investigation on spatial-temporal evolution of tip leakage cavitation in a mixed flow pump with tip clearance

Energy Performance and Flow Patterns of a Mixed-Flow Pump with Different Tip Clearance Sizes

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

Unsteady Simulation of Tip Leakage Flow Based on Dissipation Function

The investigation on the flow characteristics during the continuous development of the tip leakage vortex cavitation in an axial pump-jet propulsion

Research on blade tip clearance cavitation and turbulent kinetic energy characteristics of axial flow pump based on the partially-averaged Navier-Stokes model

Research on tip leakage vortex characteristics of axial-flow circulating pumps under unpowered driven conditions

Experimental Investigation of the Transient Patterns and Pressure Evolution of Tip Leakage Vortex and Induced-Vortices Cavitation in an Axial Flow Pump

Theoretical Prediction Model of Tip Leakage Vortex in a Mixed Flow Pump With Tip Clearance

The spatiotemporal distribution characteristics analysis and suppression of the axial tip clearance leakage flow for the liquid-ring vacuum pump

Experimental and Numerical Investigation on the Tip Leakage Vortex Cavitation in an Axial Flow Pump with Different Tip Clearances

Hydraulic Optimization and Loss Analyses of a Low Specific-Speed Centrifugal Pump with Variable-Thickness Blades