Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. In a micro centrifugal pump with tip clearance working at high speed, the pressure fluctuation and complex vortex structures related to the tip leakage flow are conducted. The external characteristics calculated by the numerical simulation and experiment method agree well, and the maximum deviation of the simulated pump head and efficiency compared with the experimental data is less than 5%. The vortex structures induced by the tip clearance flow, which is less influenced by the flow conditions, can be divided into four categories, namely backflow vortex, passage vortex, primary tip clearance flow (PTLV), and separation TLV (STLV). The evolution of these vortex structures is described by the relative vorticity transport equation, using the relative vortex stretching, Coriolis force, and viscous diffusion. The PTLV starts from the corner of blade tip gap near the leading edge (LE), and breaks away into the STLV in the region of 0.7R* to 0.8R* owing to the pushing effect of the secondary tip leakage flow. To analyze the leakage flow quantitatively, the relative velocity in the gap region is decomposed. The results show that the local maximal and minimal values of the normal component correspond to the start position of the PTLV and the separation region of the STLV, respectively. Besides, the passage vortex has the greatest contribution to the pressure pulsation of the passage from main blade to main blade (MB). But the dominant frequency of the pressure alterations has little to do with the vortex, and mainly depends on the rotor-stator interaction (RSI) between the impeller and volute tongue. The results could be referred to improve the efficiency and operational stability of the high-speed centrifugal pumps.

Investigation of tip leakage vortex characteristics around tip clearance in a mixed flow pump

Tip Clearance on Pressure Fluctuation Intensity and Vortex Characteristic of a Mixed Flow Pump As Turbine at Pump Mode

Energy Performance and Flow Patterns of a Mixed-Flow Pump with Different Tip Clearance Sizes

Theoretical Prediction Model of Tip Leakage Vortex in a Mixed Flow Pump With Tip Clearance

Spatial–Temporal Evolution of Tip Leakage Vortex in a Mixed-Flow Pump With Tip Clearance

Effect of the tip clearance on tip leakage vortex and pressure fluctuation characteristics in a helico-axial flow multiphase pump

Experimental and Numerical Investigation on the Tip Leakage Vortex Cavitation in an Axial Flow Pump with Different Tip Clearances

Tip Leakage Vortex Trajectory and Dynamics in a Multiphase Pump at Off-Design Condition

Experimental investigation on spatial-temporal evolution of tip leakage cavitation in a mixed flow pump with tip clearance

Velocity Characteristics in a Multiphase Pump under Different Tip Clearances

Effect of tip clearance flow on pressure oscillation and vortex patterns of a high-speed centrifugal pump

Spatial-temporal evolution of tip leakage cavitation with double-hump in a mixed flow pump with tip clearance

Influence of tip leakage flow and inlet distortion flow on a mixed-flow pump with different tip clearances within the stall condition

Examination on behavior of tip leakage flow in a three-stage gas-liquid two-phase flow pump

Effect of Tip Clearance on Helico-Axial Flow Pump Performance at Off-Design Case

Influence of T-shape Tip Clearance on Performance of a Mixed-Flow Pump

Numerical Study of Tip Leakage Vortex Around a NACA0009 Hydrofoil

The Influence of Blade Tip Clearance on the Flow Field Characteristics of the Gas–Liquid Multiphase Pump

Effects of Clearance and Operating Conditions on Tip Leakage Vortex-Induced Energy Loss in an Axial-Flow Pump Using Entropy Production Method

Numerical and experimental study of tip leakage vortex structures and dynamics in a mixed-flow waterjet pump

A Review of Tip Clearance in Propeller, Pump and Turbine