Abstract:Thin-layer Al/MgF2 coatings are currently used for extraterrestrial far-UV astronomy as the primary and secondary mirrors of telescopes (such as “Spektr-UF”). Successful Hubble far-UV measurements have been performed thanks to MgF2 on Al mirror coatings. Damage of such thin-layer coatings has been previously studied under exposure to high-energy electrons/protons fluxes and in low Earth orbit environments. Meanwhile, there is an interest to test the stability of such mirrors under the impact of extreme radiation fluxes from pulsed plasma thrusters as a simulation of emergency onboard situations and other applications. In the present studies, the high current and compressed plasma jets were generated by a laboratory plasma thruster prototype and operated as effective emitters of high brightness (with an integral overall wavelength radiation flux of >1 MW/cm2) and broadband radiation. The spectrum rearrangement and hard-photon cut-off at energy above Ec were implemented by selection of a background gas in the discharge chamber. The discharges in air (Ec ≈ 6 eV), argon (Ec ≈ 15 eV) and neon (Ec ≈ 21 eV) were studied. X-ray diffraction and reflectometry, electron and atomic force microscopy, and IR and visible spectroscopy were used for coating characterization and estimation of degradation degree. In the case of the discharges in air with photon energies of E < 6 eV, only individual nanocracks were found and property changes were negligible. In the case of inert gases, the energy fraction was ≈50% in the VUV range. As found for inert background gases, an emission of such hard photons with energies higher than the MgF2 band gap energy of ≈10.8 eV caused a drastic light-induced ablation and degradation of the irradiated coatings. The upward trend of degradation with an increasing of the maximum photon energies was detected. The obtained data on the surface destruction are useful for the design of methods for coating stability tests and an understanding of the consequences of emergencies onboard space research stations.

Evaluation of an x-ray multilayer mirror for radiography at sub-1-keV photon energies

Imaging Research With Non-Periodic Multilayers for Inertial Confinement Fusion Diagnostic Experiments

Ultra-precision fabrication of 500 mm long and laterally graded Ru/C multilayer mirrors for X-ray light sources

X-Ray Laser Resonator For The Kilo-Electron-Volt Range

Kirkpatrick-Baez Microscope with Spherical Multilayer Mirrors Around 2.5kev Photon Energy

Sub‐micrometre focusing of intense 100 keV X‐rays with multilayer reflective optics

Monochromatic Kirkpatrick–Baez Microscope Combining a Spherically Bent Crystal and a Multilayer Mirror

Development of Aperiodic Multilayer Mirrors Operated at W-Lβ Line for Plasma Diagnostics Application

Design and simulation of multilayer coatings for a multi-channel Wolter-like x-ray imager with large field of view and high resolution

Converting existing optical detectors into fast x-ray detectors

Spectrum of coherent VUV radiation generated by 5.7 MeV electrons in a multilayer X-ray mirror

Manufacturing and Testing of X-ray Imaging Components with High Precision

Compact high-precision soft X-ray and extreme ultraviolet reflectometer

Optimization Design of Pt/C Multilayer Supermirrorsfor Hard X-rays

Simbol-X Hard X-ray Focusing Mirrors: Results Obtained During the Phase A Study

Development of Large-Size Multilayer Mirrors with a Linear Deposition Facility for X-Ray Applications

Testing multilayer-coated polarizing mirrors for the LAMP soft X-ray telescope

Surface Degradation of Thin-Layer Al/MgF2 Mirrors under Exposure to Powerful VUV Radiation

High reflectance Cr/C multilayer at 250eV for soft X-ray polarimetry

Nano-precision metrology of X-ray mirrors with laser speckle angular measurement