Abstract:Shortly after the construction and operation of the first optical laser, designs for hard x-ray (that is, >10keV) laser systems were proposed.1, 2 Since that time, scientists have endeavored to build such a device3–7 because of the wide application that the collimated (i.e., with parallel light rays), coherent beam of femtosecond keV x-ray pulses will find in science, technology, and medicine. For instance, such an instrument could be used for tumor radiotherapy without damaging surrounding tissue. A laser consists of two main components: the resonator and the amplifying (or ‘gain’) medium. The resonator is a system of mirrors that can set up standing waves for the desired frequency of light, and the gain medium amplifies the light that passes through it. There are several severe problems to be solved for both components when building a keV x-ray laser. Atoms emit x-ray radiation when electrons move from a higher to a lower electron shell, and one restriction is the femtosecond lifetime of inner-core electron states. Another is the very low reflectivity of available ‘mirrors,’ which are carefully chosen crystals. In addition, the reflecting crystals’ Bragg angle must match exactly with the x-ray laser line wavelength. Atomic inner-shell ionization pumped by very short electron or x-ray pulses has been proposed2 as a possible means for achieving gain, and, in fact, gain at 1.146nm has been obtained by pumping neon gas with x-ray pulses.7 We designed and built the first keV x-ray laser resonator composed of four highly oriented pyrolytic graphite (HOPG) crystals (see Figure 1).8 For a complete round trip, a Bragg diffraction angle B of 45 ◦ is necessary (that is, the angle between the direction of the incident beam and the resulting diffracted beam). The graphite lattice spacing, d, is 1.677Å. Reflection from the crystal plane is denoted by the Miller index (004) has B D 45 at 2.37Å, which coincides with the wavelength of the neodymium x-ray emission line denoted L ̨ . Another possibility for resonator crystals is diamond crystals,9 which have much higher reflectivity than graphite. However, the Bragg diffraction acceptance angle is very narrow (of the order of arcseconds for diamond crystals), Figure 1. Schematic representation of path traversed by the x-ray beams for two wavelengths in a four-crystal laser resonator. Dashed line: path taken by the neodymium ‘L ̨ ’ (5.27keV) x-ray photons making complete round-trips in the resonator. Solid line: path taken by the chromium ‘K ̨ ’ (5.41keV) x-ray photons and of the x-ray photon beam used to measure the reflectivity, losses, and change in divergence as it propagates in the cavity. G1, G2, G3, and G4 designate the location of the highly oriented pyrolytic graphite (HOPG) crystals. Reprinted with permission.8

X-Ray Laser Resonator For The Kilo-Electron-Volt Range

Cavity for Hard, Kev, X-Ray Laser

Proposal for an X-Ray Free Electron Laser Oscillator with Intermediate Energy Electron Beam

X‐ray optics for the cavity‐based X‐ray free‐electron laser

Optical cavity r & d for laser-electron interaction applications

Laser-driven powerful kHz hard x-ray source

X-Ray Resonance In Crystal Cavities: Realization Of Fabry-Perot Resonator For Hard X Rays

3Kw Liquid-Cooled Elastically-Supported Nd:YAG Multi-Slab CW Laser Resonator.

Evaluation of an x-ray multilayer mirror for radiography at sub-1-keV photon energies

The Experimental Investigation of the Hohlraum Energetics of Two-Entrance Holes Spherical Hohlraum at the 100 Kj Level Laser Facility

Design and Simulation for 100-Watt-class 340-Ghz Extended Interaction Klystron

Cr:Yag Passively Q-Switched Single-Frequency Nd:Yvo4 Ring Cavity Laser

Numerical simulation of 30-kW class liquid-cooled Nd:YAG multi-slab resonator

0.22-Thz Extended Interaction Klystron Based on Orthogonal Interconnection Structure

Investigation on a 0.34thz Dual-Open-Cavity Extended Interaction Klystron

Gyrotron with Multi-Mirror Quasi-Optical Cavity

Thermal loading on crystals in an X-ray free-electron laser oscillator

Hard X-Ray Emission from Intense Femtosecond Laser-Solid Target Interactions

A Highly Overmoded Structure for Hundred-Kilowatt-Class Ka -Band Extended Interaction Klystron

A Highly Overmoded Structure for Hundred-Kilowatt-Class <i>Ka</i>-Band Extended Interaction Klystron

An x-ray regenerative amplifier free-electron laser using diamond pinhole mirrors