Abstract:Purpose This study aims to further refine the model, explore the influence of cutting parameters on the machining process, and apply it to practical engineering to improve the efficiency and quality of titanium alloy machining. Design/methodology/approach This paper establishes a comprehensive thermo-mechanical fully coupled orthogonal cutting model. This paper aims to couple the modified Johnson–Cook constitutive model, damage model and contact model to construct a two-dimensional orthogonal cutting thermo-mechanical coupling model for high-speed cutting of Ti6Al4V. The model considers the evolution of microstructures such as plastic deformation, grain dislocation rearrangement, dynamic recrystallization, as well as stress softening and hardening occurring continuously in Ti6Al4V metal during high-speed cutting. Additionally, the model incorporates friction and contact between the tool and the workpiece. It can be used to predict parameters such as cutting process, cutting force, temperature distribution, stress and strain in titanium alloy machining. The study establishes the model and implements corresponding functions by writing Abaqus VUMAT and VFRICTION subroutines. Findings The use of different material constitutive models can significantly impact the prediction of the cutting process. Some models may more accurately describe the mechanical behavior of the material, thus providing more reliable prediction results, while other models may exhibit larger deviations. Compared to the Tanh model, the proposed model achieves a maximum improvement of 8.9% in the prediction of cutting force and a maximum improvement of 20.9% in the prediction of chip morphology parameters. Compared to experiments, the proposed model achieves a minimum prediction error of 2.8% for average cutting force and a minimum error of 0.57% for sawtooth parameters. This study provides a comprehensive theoretical foundation and practical guidance for orthogonal cutting of titanium alloys. The model not only helps engineers and researchers better understand various phenomena in the cutting process but also serves as an important reference for optimizing cutting processes. Originality/value The originality of this research is guaranteed, as it has not been previously published in any journal or publication. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0168/

Analyzing cutting force and vibration amplitude in high-speed milling of SKD11 steel with thermal assistance

Experimental Studies of Cutting Temperature During High-Speed Milling of Aerospace Aluminum

Research on 3D Numerical Simulation and Experiment of Cutting Temperature for High Speed Milling of Aerospace Aluminum Alloy

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Experimental research on the dynamic characteristics of the cutting temperature in the process of high-speed milling

Fe Analysis of the Effects of Cutting Speed on Thermomechanical Responses of Aisi 4142 Steel in High Speed Cutting

Finite element simulation of high-speed finish milling of SKD11 hardened steel based on modified constitutive equation

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Modeling and experimental validation on temperature diffusion mechanism in high-speed bone milling

Experimental investigation and optimisation of the micro milling process of hardened hot-work tool steel

Investigation on cutting forces and tool wear in high-speed milling of Ti-6Al-4V assisted by longitudinal torsional ultrasonic vibrations

A Novel Finite Element Model for Thermally Induced Machining of Ti6Al4V

A thermo-mechanical fully coupled model for high-speed machining of Ti6Al4V

Research on cutting force and surface integrity of TC18 titanium alloy by longitudinal ultrasonic vibration assisted milling

Characterization of material strain and thermal softening effects in the cutting process

Experimental study on machinability improvement of hardened tool steel using two dimensional vibration-assisted micro-end-milling

Online monitoring and multi-objective optimisation of technological parameters in high-speed milling process

Analytical modeling of workpiece temperature in laser-assisted milling considering the combined effect of multi-heat sources

Experimental Research and Optimization of Cutting Parameters for High Speed Machining