Abstract:This work addresses the prediction and optimization of average surface roughness (Ra) and maximum flank wear (Vbmax) of 6061 aluminum alloy during high-speed milling. The investigation was done using a DMU 50 CNC 5-axis machine with Ultracut FX 6090 fluid. Four factors were examined: the table feed rate, cutting speed, depth of cut, and cutting length. Three levels of each factor were examined to conduct 81 experiment runs. The response parameters in these experiments were measurements of Ra and Vbmax. We applied a two-pronged approach that combines machine learning (ML) and a Nondominated Sorting Genetic Algorithm (NSGA-II) to model and optimize Ra and Vbmax. Four ML models were used to predict Ra and Vbmax: linear regression (LIN), support vector machine regression (SVR), a gradient boosting tree (GBR), and an artificial neural network (ANN). The input variables were the significant factors that affect the surface quality and tool wear: the feed rate, depth of cut, cutting speed, and cutting time. Several quality metrics were employed to quantify the performance of the models, such as the root mean squared error (RMSE), mean absolute error (MAE), and coefficient of determination (R2). As a result, SVR and ANN were found to have the best predictive performance for Ra and Vbmax. These models and the NSGA-II-based approach were then employed for multiobjective optimization of cutting parameters during high-speed milling of aluminum 6061. Fifty Pareto solutions were found with Ra in the range of 0.257 to 0.308 μm and Vbmax in the range of 136.198 to 137.133 μm. Experimental validations were then conducted to confirm that the optimum solution was within an acceptable error range. More precisely, the absolute percentage errors for Ra and Vbmax were 2.5% and 1.5%, respectively. This work proposes an effective strategy for efficiently combining machine learning techniques and the NSGA-II multiobjective optimization algorithm. The experimental validations have reflected the potential for applying this strategy in various machining-optimization problems.

Online monitoring and multi-objective optimisation of technological parameters in high-speed milling process

Application of vibration singularity analysis, stochastic tool wear, and GPR-MOPSO hybrid algorithm to monitor and optimise power consumption in high-speed milling

Multi-objective Machining Parameter Optimisation for Residual Stress Based on Quantum Cat Swarm

High Efficiency Orientated Milling Parameter Optimization with Tool Wear Monitoring in Roughing Operation

Analysis of Multi-Objective Optimization of Machining Allowance Distribution and Parameters for Energy Saving Strategy

Machine Learning-Based Modelling and Meta-Heuristic-Based Optimization of Specific Tool Wear and Surface Roughness in the Milling Process

Cutting Energy Consumption Modeling by Considering Tool Wear and Workpiece Material Properties for Multi-Objective Optimization of Machine Tools

Modeling and Multi-objective Optimization Method of Machine Tool Energy Consumption Considering Tool Wear

Modelling and Optimization Method for Energy Saving of Computer Numerical Control Machine Tools under Operating Condition

Multi-objective optimization of hard milling process of AISI H13 in terms of productivity, quality, and cutting energy under nanofluid minimum quantity lubrication condition

Prediction of Tool Wear Width Size and Optimization of Cutting Parameters in Milling Process Using Novel ANFIS-PSO Method

Energy Consumption Considering Tool Wear and Optimization of Cutting Parameters in Micro Milling Process

An Effective and Automatic Approach for Parameters Optimization of Complex End Milling Process Based on Virtual Machining

Multiobjective Optimization of Surface Roughness and Tool Wear in High-Speed Milling of AA6061 by Machine Learning and NSGA-II

Online monitoring model of micro-milling force incorporating tool wear prediction process

Estimation of tool wear and optimization of cutting parameters based on novel ANFIS-PSO method toward intelligent machining

Multi-objective parameter optimization of CNC plane milling for sustainable manufacturing

A process parameters decision approach considering spindle vibration in helical surface milling for minimising energy consumption and surface roughness value

Combined analysis of acoustic emission and vibration signals in monitoring tool wear, surface quality and chip formation when turning SCM440 steel using MQL

Multi-objective Modelling and Optimal Parameter Selection of a Multi-Pass Milling Process Considering Uncertain Milling Stability Constraint

A novel method for tool condition monitoring based on long short-term memory and hidden Markov model hybrid framework in high-speed milling Ti-6Al-4V