Abstract:Mg-Zn-Sn-Mn alloy is a new type of age hardening wrought Mg alloy. However, the precipitation behavior of the alloy is still not well understood. A solution-treated Mg-6Zn-4Sn-1Mn alloy is selected as the experimental alloy in this paper. The hardening behavior, precipitate microstructure and precipitation sequence of the solution-treated alloy during single aging and double aging at 180 °C are systematically studied by means of XRD, OM, SEM, TEM, EDS and microhardness. The results show that four types of precipitated phases are successively precipitated in the experimental alloy during the aging treatment, namely, G.P. zone parallel to the (0001)α base plane, rod-like β1′(MgZn2) phase perpendicular to the (0001)α base plane, disc-like β2′ (MgZn2) phase parallel to the (0001)α base plane, and irregular β' (Mg2Sn or Mg3Sn) phase. The habitual plane of most β' phases is the (0001)α basal plane, and a small part of the β' phase forms a certain angle with the (0001)α basal plane. A large number of finely dispersed G.P. zones can provide the heterogeneous nucleation sites for the β1′ phase during the pre-aging stage, which promotes the nucleation of the precipitates during the second aging, so the peak aging hardness (87HV) of the double-aged alloy is much higher than that of the single-aged alloy (74HV), and the peak aging time (6 h) during second aging of the double aging is shorter than that (12 h) of single aging. The possible precipitation sequence of Mg-6Zn-4Sn-1Mn alloy during the isothermal aging treatment can be obtained, that is, α-Mn→β1′ (MgZn2)→β (MgZn) in the Mn-rich zone, and SSSS→G.P. zones→β1′ (MgZn2)→β2′(MgZn2)→β' (Mg2Sn or Mg3Sn)→(β (MgZn) and β (Mg2Sn)) in Zn-rich and Sn-rich zone.

Remarkable age-hardening response and microstructural evolution of Mg-7Sn alloy

Improvement in the age-hardening response of Mg–7Sn alloy by compressive stress-assisted aging

Effects of solid solution and aging process on microstructure and mechanical properties of Mg-Gd-Y alloy

Microstructure evolution and age-hardening response in Mg-Sn-Sm alloys under a wide range of Sm/Sn ratio

Age hardening responses of as-extruded Mg-2.5Sn-1.5Ca alloys with a wide range of Al concentration

Aging hardening and precipitate behavior of a solution-treated Mg-6Zn-4Sn-1Mn (wt.%) wrought Mg alloy

Research Progress in Age-Hardenable Mg-Sn Based Alloys

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Enhanced Age-Hardening Response and Microstructure Study of an Ag-modified Mg–Sn–Zn Based Alloy

Influence of Sn and Zn on age-hardening behavior of Mg-6Al magnesium alloy

Effects of Mg2Sn precipitation on the age-hardening and deformation behaviour of a Mg-Sn-Al-Zn alloy

Effect of Y on Age Hardening Response and Mechanical Properties of Mg-xY–1.5LPC −0.4zr Alloys

Enhancement of Hardening and Thermal Resistance of Mg–Sn-based Alloys by Addition of Cu and Al

Study on Microstructural Evolution and GP Zone Strengthening Mechanism by Solution and Aging Treatment in Non-dendritic Mg-6Zn-5Al Magnesium Alloy

Improved age-hardening behavior of Mg-Sn-Mn alloy by addition of Ag and Zn

Microstructure modification and precipitation strengthening for Mg–6Zn–1Mn–4Sn–0.5Ca through extrusion and aging treatment

Pre-strain mediated fast natural aging in a dilute Mg-Zn-Ca-Sn-Mn alloy

Effect of aging temperature on the hardening behavior and precipitation evolution of Mg 10Gd alloy

Improvement of mechanical properties of hot extruded and age treated Mg–Zn–Mn–Ca alloy through Sn addition

The Improved Age Hardening Response of Mg-11Al Alloys with Ag, Sc Addition and Corresponding Microstructure Characterization

Aging-Assisted Grain Boundary Engineering and Its Impact on the Deformation Behavior in Precipitation Hardenable Multicomponent Mg-10Sn-3Al-1Si Alloy